answersLogoWhite

0


Best Answer

the driver's door should only be opened and the trunk,then rock the switch and see how that works

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you fix an alarm system on a 95 Jag XJ6 it won't go into LEARN mode after you rock the valet switch 5 times with the trunk and drivers door open?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Car alarm will not stop car. Is there a kill switch for the alarm Car is a '87 Nissan maxsima. the alarm is a unic alarm system?

unplug the car battery this should reset the system. If it doesnt, i presume you do not have the remote for it? I assume the doors are locked also? put the key in the door turn it left, right, left. this should de-activate the system. If there is a kill switch, also known as a valet switch it should be under the dash on the drivers side near where the fuse panel is.


How do you turn off the alarm without the remote?

Unlock the drivers door with the key or insert the key into the ignition switch and turn the switch to the on position will turn off the alarm.


When changing the battery on 2004 Toyota Tacoma Pickup will it affect the alarm system and if so how do you reset it?

the factory alarm is turned on and off by the drivers door-key-switch....or with the factory remote if you have one...unlocking the door with the key turns off the alarm...:)


How do you get the anti-theft system off of a 1989 Chrysler Lebaron can not start our car?

if it is a factory alarm, you have to unlock the door with a key from the outside. most likely the switch is busted on the drivers side so try the passengers side. if it works, go buy a switch for the drivers side. the switch is on the end of door lock cylinder.


How do you find a problem in a 1998 dodge caravans alarm system?

You need to find a DRB III(chysler diagnostic tool), access the body modual, then access alarm system, read trouble codes for alarm system. This should direct you in the right direction of the problem. Check the hood switch, the are known to cause problems, it is located at to drivers side under the hood.


Is the factory alarm system on a 07 Toyota Camry a kill switch?

I'm not sure what you mean by "kill switch" But there should be a red push button on the bottom left of your dashboard. The switch can be used to reset your alarm system


Alarm keeps going off on your 1993 ford explorer how do you fix this?

The alarm switch system is not working right. This could be a door switch, or a wiring problem. the system needs to be checked one switch at a time, then the wiring is checked next.


How do you disable the Alarm on a 1984 Corvette?

I have a 1984 Corvette and the alarm went off. Is there a switch, key or button that I can turn the alarm off? Thank you! The alarm is reset by inserting the door key into the drivers door and turning the key.


How do you reset the alarm system on 2002 Chevrolet Cavalier?

Turn the ignition switch to the auxiliary position. Do not start the engine. Leave the ignition switch in the auxiliary position for 30 seconds. This will reset your alarm system.


How do you disconnect the alarm system on a 1997 Pontiac sunfire?

unplug the alarm fuse 10 in the fuse box located when you open the drivers side door. it will trip the theft system momentarily, possibly starting. also you may have wiring problems if it starts and stop. passlock sensor, ignition switch, etc


Where do you find the alarm system brain on a 2000 4Runner?

It should be under the drivers seat


Where is the reset switch on the 2001 Dodge Neon Fatory Alarm System?

The 2001 Dodge Neon factory alarm system does not have a reset switch. Instead, you need to insert the key into the driver's door and turn to unlock the door. Next, turn the key clockwise to initiate the alarm and turn counterclockwise to stop the alarm. Once you stop the alarm, it will reset itself.