You need to remove the door trim. It's probably the connecting rod which needs to be replaced, which isn't uncommon on a GM truck.
There are 2 screws in the bottom of the door and 2 more under the door handle in the inside of the car just pop it off at the seems and screws will be inside pop panel off and unplug the power locks
there is about 7 screws in the front door and u have to take the pin out for the window crank unless its power windows there s screw where the handle is and where u open the door on the inside
What do I need to do to take the door panel off a 1996 Chevy Silverado? Pickup has power windows and door locks I need to fix inside door handle
remove inside handle + window crank (if not power), screws in armrest, pop of trim from inside this will show you inside of door, pay attentionto direction of linkage connection and it's relationship to the latch mechanism. this link has a funky clever clip holding it to the handle, disconect it from the handle and you should be able to see the fasteners for the handle.
Ranger pickup truck usually has one fuse for all of the power windows. The location of the fuse can be found on the inside cover of the fuse box.
You need a rake or leave blower. A power washer or a long handle brush to clean exterior & wash windows.
All I did was start at the corner by the mirror adjuster and popped it off. There are plastic plugs that hold it in place. They easily pop in and out of their holes. I also removed the two screws in the door handle recess (one behind the handle, one behind the lock.) Now, I couldn't pull the panel off completely because there was some wiring (power locks/windows)on the inside that I was afraid of tearing out. But, the panel was lose enough for me to get my arm inside and mess around with the windows.
no power on the power windows switch
A blown power window fuse is the most common reason for the power windows not to go down. The fuse can be found in the fuse box. The location of the fuse can be found on the inside cover of the fuse box.
I have a 1996 Rodeo and over the past 5 years or so the following has occured... The power locks went out, they don't work from any door. The power windows went out, the back two work from their door but that's it. The drivers side back door will not open. The passengers side back door has to have the inside handle and outside handle pulled to work. I wish they were manual now, it doesn't sound so bad having to roll down the windows now that they can't go down.
Its the Bulky looking ones. Number 3. there a chromish color looks more like aluminum.
Power windows were an option.