usually the acutator motor in the door is bad sometimes they get wet and lock up. You must remove the door panel you can feel down inside the lower rear part of the door and you can feel the motor there is a pop rivit that has to be drilled out from the outside. There is one bolt on a bracket inside the door you can see it. The acutator rod to the latch and power plug must be unhooked. These are not cheap at auto zone they are about a $100 each at Ford you will probably have to finance them.
MAKE SURE IT IS NOT THE SWITCH BEFORE YOU GO TO ALL THE TROUBLE.
Sometimes the linkages are binding and the actuator could not hit home on the power stroke. Make sure by removing door panel and see before you make any costly repairs.
Is the remote's battery dead?
check switch on driver control panel
If the power door locks quit working on a 1979 Corvette, it is due to broken pigtail switches. With age and use, the pigtails break and leaves the power door locks inoperable.
power door locks don't work on my 1997 Honda crv
Not necessarily. Keyless entry will have power door locks, but not all power door locks are coupled to a keyless entry system.
what about them? yeah for real, my door locks work pretty well.
The driver door does not unlock the power locks for a few reasons. This motor could be burned out or the wires could not be attached correctly.
Remove the power locks and windows fuse you will loose power for your windows also
Pull the fuse
mine doesn't have
How do door locks work?
how to disable power door locks on 2003 ford taurus,i don`t have the manual