Wiki User
∙ 2010-03-28 15:03:04Adjust or replace the brake light switch.
Wiki User
∙ 2010-03-28 15:03:04the parking brake may be stuck and that causes the brakes to lock up completely, and the horn and lights will stick work if the parking brake is stuck.
If you are referring to the brake light then the brake light switch is stuck.
Brake light switch is stuck or out of adjustment.
The same thing happened to me. It's the brake lights switch either under or over the brake pedal. The same thing happened to me. It's the brake lights switch either under or over the brake pedal.
The brake light switch is stuck or out of adjustment. If it is a mechanical switch it is located somewhere on the brake pedal swing arm. If it is a pressure switch it is located near the Master Cylinder.
the brake switch at the pedal is stuck or out of adjustment.
most times if brake lights are stuck on you have a bad brake light switch on pedal under dash
Brake Lights "Stuck" ONUsually that is caused by the brake light switch becoming "out of adjustment," but sometimes it can be caused by a defective brake light switch.
More than likely, your brake switch is fused, or stuck down.... here. when you push on the brake, the pedal taps a button to indicate that the brakes have been pressed. this button is a gate to the power provided to the tail lights, therefore, when it is pressed, they light up. this button could be stuck. disconnect the harness and see if the lights go off. if they do, replace the switch.
"Stuck" brake lights indicate that the brake light switch on the brake pedal is broken. It should be replaced.
There are a couple of reasons why a 1998 Honda Accord may be stuck in park. The immobilizer system may need to be replaced or the transmission is having problems.
My 1998 Honda Accord LX was getting stuck intermittently in Park. I found that the switch that turns on the brake light when you press the bake pedal was going out. This switch is $32.00 at any Honda dealer and most importantly YOU can change it yourself. Ironically, that same switch activates the gear shifter pin that lets you take it in and out of gear.