Dusty Muleman
You flush it first off with fresh water using the flush points wash off all salt with fresh water in jet and boat, then flush engines with antifreeze you will need to make an adapter for this off a bottle, then run engines until antifreeze comes out do not Rev as there is no pressure! Then stall engine by putting fogging oil into carbs, turn fuel off disconnect batteries, spray engines with wd40 job done
can crack the engine.
Do you mean flush the oil (not recommended) or flush the coolant?
No they are completely different. A engine flush will only clean the engine a transmission flush will only clean the transmission. These two components use two different kinds on fluid therefor they can not be mixed together.
Not far, anyway. The engine flush is not engine oil ... its only purpose is to, hopefully, clean the inside of the engine areas. That's why it's called "Engine Flush" and not "Engine Oil". Get it out and put the new oil in soon.
Add Engine Flush to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Engine Flush is compatible with all commercially available motor oils. We recommend cleaning the engine interior with Engine Flush before every oil change.
A boat with a gasoline inboard engine
power boat
speed boat
You will not damage the engine but you can damage the radiator if you use any high pressure. If you only flush and apply no pressure you will do no damage. Use a chemical flush and a water hose and you will be safe.
To flush an engine of coolant in the engine of a Kian Spectra refer to the manual. Auto manuals can be purchased at auto part retails or in bookstores.