Best Answer

please don't flush the trnasmission oil it can blow your transmission resulting in bog loss. Just change the oil is beeter open the transmission oil bolt underneath the engine and wait for 15 minutes so that all the oil can come out. After putting in bolt pour the new transmission oil.

User Avatar

Wiki User

โˆ™ 2015-07-15 20:04:08
This answer is:
User Avatar
Study guides

Add your answer:

Earn +20 pts
Q: How do you flush the automatic transmission fluid on a 2000 Mercury Villager?
Write your answer...
Still have questions?
magnify glass
Related questions

What kind of transmission fluid for a 2000 Mercury Villager?

Motorcraft MERCON automatic transmission fluid for the automatic transaxle ( according to the owners manual )

What kind of ATF for 2002 Mercury Villager?

The type of Automatic Transmission Fluid to use is engraved into the fluid level dipstick ( or indicated on the dipstick handle ) for the automatic transaxle ( transmission )

What type of power stearing fluid is used on a 1998 mercury villager?

Motorcraft MERCON automatic transmission fluid ( according to the Owner Guide )

How do you drain transmission fluid in a Mercury villager?

There is a drain plug in the transmission pan.

Where do you add transmission fluid for 1997 mercury villager?

Transmission fluid is added through the dipstick tube.

Where do you add transmission fluid on mercury villager 1997?

Transmission fluid is added through the dipstick tube.

Where is the transmission dipstick on a 1996 mercury villager?

Looking from the front the automatic transaxle fluid dipstick is just to the left of the engine coolant reservoir

Check tranny fluid in 98 Mercury Villager?

In the 1997 Mercury Villager, the Transmission fluid dipstick is located on the driver's side of the engine just in front of and below the master cylinder/brake fluid check. The 97 Villager has a bulbous knob on top with no indication that it is the Transmission fluid.

Where is ATF dip stick on 1996 Mercury Villager?

Auto transmission fluid.

How do you add automatic transmission fluid to 1996 Mercury Villager?

The same place where you check it, there is a tube that comes up in the right center behind and to the left of the coolant reservoir. It has a small black ball on top. That is your transmission fluid dipstick. It is, unfortunately, not marked in any way. Pull that out and if you need to add fluid put a funnel in that tube and do so.

What is transmission fluid capacity for 2000 mercury sable?

The Mercury Sable transmission has a fluid capacity of 12 quarts. You can use any SAE certified automatic transmission fluid.

What type transmission fluid for 2000 Mercury Sable?

According to the 2000 Mercury Sable Owner Guide : ( Motorcraft MERCON - V , automatic transmission fluid in both types of automatic transaxle / transmission )

People also asked