answersLogoWhite

0


Best Answer

Cooling SystemEnsure that the engine is completely cool prior to starting this service. 1. Remove the recovery tank or radiator cap. 2. Raise and support the vehicle. 3. Place a drain pan of sufficient capacity under the radiator and open the petcock (drain) on the radiator. è Plastic petcocks easily bind. Before opening a plastic radiator petcock, spray it with some penetrating lubricant. 4. Drain the cooling system completely. 5. Close the petcock. 6. Remove the drain pan. 7. Lower the vehicle. 8. Determine the capacity of the cooling system, then property refill the system with a 50/50 mixture of fresh coolant and distilled water. 9. Leave the recovery tank or radiator cap off to aid in bleeding the system. 10. Start the engine and allow it to idle until the thermostat opens (the upper radiator hose will become hot). The coolant level should go down, this is normal as the system bleeds the air pockets out of the system. 11. Refill the system with coolant to the proper level. 12. Turn the engine OFF and check for leaks.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you flush the coolant system in ford expedition 2000?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you flush the coolant system in Chevy silverado 2000?

go to the auto store and buy some prestone flush. instructions are on the back. basically you drain your radiator, pour in the flush, refill the system with water, run the engine with the heater on high for about 15 minutes, then drain the system again, refill it with 50/50 coolant.


What is effective to flush out coolant on Celica 2000 GT?

water


2000 Chevy truck heater not working?

you probably need to flush the coolant system. GM claims that the coolant is good for a ridiculous number of miles, but it is not so. The coolant breaks down and forms large clumps which will clog up the heater core. You may need to flush several times to get it all out.


What color of coolant for Ford Expedition?

Years 1997-2000 is green coolant. I don't know the newer vehicles.


Where is the bleeder screw on a 2000 Honda civic coolant flush and fill?

there isnt one after 1996


2000 dodge durango and it keeps over heating?

If your vehicle keeps overheating, you should flush the cooling system, replace the coolant, and replace the thermostat. In fact, you should have done that before this.


Do a 2000 Ford Expedition have a radiator cap?

The thread on cap on your engine coolant reservoir is the " radiator " cap


Why won't my heater blow hot after a coolant flush and changing of the thermostat in a 2000 Taurus?

probably the heater core is clogged


Where is the coolant temperature sensor for 2000 Ford Expedition 5.4 L 4x4?

it is behind the thermostat in the water jacket


What brand of coolant for 2000 Toyota solara?

Check your owner's manual. It recommends Toyota brand longlife (red) coolant. Toyota coolant is 'similar' to GM's Dexcool (orange) but the chemical makeup is slightly different. Do NOT use standard (green) Ethylene Glycol coolant unless you completely drain and flush (at least twice) your cooling system. Cheers


How do you bleed your V6 coolant system?

how do i bleed my accord v6 2000 coolant system, its has air and the rev's gone up & down......


2000 Chevy Malibu i raplaced the head gasket and the thermostat still heats up?

flush the system and change thermostat,this should fix problem. I flushed mine and i changed coolant and thermostat,it is now fine.