Antifreeze and Engine Coolant
Radiators
Ford Ranger
Chevy Suburban

How do you flush the radiator for a 1998 suburban?

262728

Top Answer
User Avatar
Wiki User
Answered
2005-11-30 01:27:36
2005-11-30 01:27:36

The easy way is to buy a flush kit from prestone ($7) and follow the directions. You will basically be splicing in a tee fitting that accepts your garden hose, and adding a can of flush to the cooling system. After 10 minutes of run time you will turn or the hose and 'backflush' the old coolant out the top of the radiator. Messy, but it works. I hope this helps you. Mark

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


The radiator drain is on the bottom of the radiator, generally under the lower hose.


How do you replace a radiator in a 1993 suburban?


Remove The Radiator And Have A Radiator Shop Test, And Flush It.


blower motor eltavolitas 1998 acura tl3.2


It is on the inside bottom right corner of the radiator. Towards the engine. It will be a plastic drain cock. It is hard to see, but it is there,


wher is the radiator cap on a 2001 chevy suburban


Just flushing the radiator, no but to flush the system, yes.


there is a radiator plug on the bottom passenger side of the radiatior, take that out and flush from the radiator cap.


Replace, flush, or repair, depending on what the problem is.


Cleans antifreeze and dirt out of the radiator


Take off the radiator cap while cool. Open the radiator and start to drain into a bucket. Use water hose to run water into the radiator until the water drains clear.


To flush a Toyota Previa radiator, first drain the antifreeze in the radiator into a bucket. This is done by turning the valve at the bottom of the radiator. Close the valve and add a radiator flush product purchased at an automotive parts store. Follow the directions on the bottle of flush. This usually means running the vehicle for a certain amount of time and then draining the radiator again.


I would suggest purchasing a "flush kit" from any local auto parts store. Follow the directions on the flush kit and be sure to recycle the old coolant. It is easier than it looks.


is there a drain plug on the radiator


Get a new radiator or flush it out?


It would be best to disconnect the coolant lines and flush the core after the radiator flush. This will clear any sediment from the core.


Drain the radiator. Leaving the drain plug open, run water from a hose into the radiator and continue to flush until the out coming water is clear.


form_title=Radiator Flush form_header=Keep your car's system clean! If you need a radiator flush, we will help you find the auto service you need. What is the year, make and model of your vehicle?=_ Is this the first time you've had your radiator flushed?= () Yes () No () Not Sure Did you ever have the radiator replaced on this car?= () Yes () No () Not Sure Have you noticed any problems with your radiator?=_


there is a plug on the bottom of the radiator, pull it. what i do is take the whole thing out and you a garden hose and flush it out like that.



Take your car into a shop that does radiator flushes or buy a radiator flush kit from autozone or advanced auto stores you just need the cleaner and a hose


You have to pull the lower radiator hose to drain/flush the radiator



In order to flush the radiator you will need to remove the lower tray to access the hose. Unscrew the drain plug attached to the hose and let the radiator drain.


When standing facing the Suburban, the radiator drain plug is on the lower right-hand side of the radiator. Drain the radiator coolant into a bucket by turning the drain plug three-quarters of a turn to loosen.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.