Buy a flush kit at Wal-Mart or auto parts comes with fittings adaptors and instructions
On a 2000 Ford Ranger , 4.0 liter EFI , V6 engine : Follow the top radiator hose from the radiator , it connects to a metal pipe which is part of the engine cooling thermostat housing The engine cooling thermostat is inside the housing that is bolted to the front of the engine
On a 2000 Ford Ranger : With the engine cold the radiator should be filled to the seat for the radiator cap and the engine coolant reservoir should be filled to the cold mark
what type of radiator fluid does a 2000 ford ranger take?
First you need a REALY big toilet
Buy a new car its a pos
Generally Surbaru wants a radiator flush as part of the 60k service. However you have some leeway here.
i flush the radiator filled it with antifreeze water .. now i heard i should take out air from inside of radiator or hoses so the air will not block circulation of the water? thank you.
Assuming you are looking for the radiator drain valve, you will find it on the passenger side of the radiator, under the lower radiator hose.
In a 2000 Ford Ranger : 2.5 liter four cylinder engine has a timing BELT 3.0 and 4.0 liter V6 engines have a timing CHAIN
To flush the radiator on a 2000 Pontiac Montana, start by ensuring the engine is cool and then locate the radiator drain valve at the bottom of the radiator. Open the drain valve and allow the old coolant to drain into a suitable container. Next, close the drain valve, fill the radiator with a radiator flush solution and water, run the engine for about 10-15 minutes with the heater on, then drain again. Finally, refill the radiator with fresh coolant and check for any leaks.
hi i have smal question,how to change thermostat in Toyota echo 2000 thanks
According to the 2000 Ford Ranger Owner Guide : ( 5W-30 engine oil ) for the 2.5 liter four cylinder , 3.0 + 4.0 liter V6 engines