IF THIS IS A STICK YOU DONT IF THIS IS A AUTO YOU CANT FLUSH THE TRANS THAT WOULD BE A DEALER PIECE OF EQUIPTMENT BUT MOST DEALERS CHANGE THE FLUID AND FILTER IN THE TRANS BY DROPPING THE THANS PAN AND REPLACING THE FILTER AND PAN GASKET. NOT A JOB FOR THE AVERAGE PERSON BECAUSE IF YOU SCREW UP THE CAR MAY NOT SHIFT
Most of the larger computerized salvage yards will have that info and can tell you if they are compatable.
It depends on the type of cavalier motor you have. If the 96 cavalier tranny has no dipstick then you will have to change the computer as well the 95. It's not worth it, find something in the 95,97,98,99,00 models.
95 to 98 2.2 will all interchange
i don't see why not the 2.2 was used in 95 and 96 should fit right in
The temperature sending unit on a 96 cavalier is on the front of the engine. It is just to the left of the alternator.
where is 1996 cavalier convenience center
The solenoid/starter motor assembly is installed on the lower part of the engine next to the transmission bellhousing
22 ft lbs torque on the rocker arm nuts is all that is required.
There was a website that said it was underneath the cavalier.
It will bolt up. But it will not work. The 96 transmission is a computer controlled transmission/ Electronic. The 79 is not.
9 to 1
in your car
Check the lines for the transmission fluid that run to and from the radiator. It could also be a bad gasket.
The adjustment is on the shift cable that is connected on to the top of the transmission
If the transmission is slipping (the engine revs up when it shifts), if the transmission shifts late, even under normal acceleration, or if the tansmission simply won't shift, you should get it checked. Also make sure the fluid level is adequate.
The diagram for the 96 Cavalier horn placement can be found in the Cavalier service manual. The manual can be bought in most auto parts.
The LCM of 22 and 96 is 1056
The GCF of 22 and 96 is 2
Where is location transmission plug on Mazda 96 626
Which one? What are you having problems with?
A coolant flush on a 96 Z34 Chevy Monte Carlo helps greatly with increasing the efficiency of the cooling system. It removes buildup and contaminants from the system.
If the 96 Transmission is a 5speed and the 2001 prelude is a 5speed, the mount from the 2001 Transmission should bolt up to the 96 Transmission and be a Direct Bold on Replacement.