How do you get a high gloss finish on a guitar?
to provide a high gloss finish (while making a guitar), first make sure there is no orange peel, or any bumps in the initial color coats of the finish. there should be about 4-5 coats of the said color finish on the guitar. sand the color lightly, and apply the gloss lacquer, about 5-6 coats. Sand the finish with 400, 1000, and 2000 grit sand papers in that order. you should see some of the shine start in this, but not in the mirror- like gloss usually seen on high gloss finishes. finally, take some wax and a buffer, and buff the sanded finish until it is buffed to a mirror-like sheen.
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
You bought Sherwin Williams flat paint and decided to change to a satin finish is there something to add to the flat paint to change it to a satin finish?
Emulsion is a type of paint, some call it latex, and it is water based. Emulsion paint comes in several gloss factors (levels). Gloss paint refers to the hardness of the finish and the amount of light reflected from it. The most common gloss factors (from least to most) are: Matte - used for ceilings and areas that do not get touched, or in some cases for the depth of color. This paint can not…
A Smooth Hardwood Floor with a high gloss with be the most slippery. The finish on the wood leaves a coat of protection, but also makes it slippery. There are different types of hardwood and finishes though, some are made to be nonslip, some are made to be reflective and high gloss. See: Related Links
you can mix paint of different sheen levels provided they are of the same vehicle or base (i.e.. water based, oil based. Mixing a satin with a semi-gloss will still be reasonably close to an "eggshell" finish. The best way to know is to use the chart below and add the 2 sheen level percentages together and divide by 2. For example a low sheen (satin) is 20% sheen + Semi-Gloss which is lets say…
How do you remove a sticky spot that resulted from placing a leather box onto a high gloss furniture finish?
The key is to know what the high gloss finish is. There are many different kinds out there. The best advice would be to go a a very good furniture store, hardware store, lumber store and ask someone trustworthy. Dont trust anyones advice about home-remedies until you know for sure - they usually just make it worse and make a total refinishing of the table the only option.
Polyurethane coatings provide a thin film, high gloss finish with exceptional weathering performance characteristics. This coating is used in virtually all industrial markets to provide a smooth durable finish that has superior resistance to corrosion, abrasion, and chemical exposure. Polyurethanes are normally used to topcoat high build epoxy and inorganic zinc.
Most vinyl flooring comes with finishes from matte to high gloss and do not need any additional treatment. There are products like "no wax waxes" that can add luster to a vinyl floor, but are not impenetrable. I think that because vinyl is a soft flooring material that is easily dented and cut, any substance used to create a hard glossy finish might crack and peel.