In 1996 all cars sold in the U.S. had to be made with what they call OBD2 (Onboard Diagnostics 2). This system cannot be checked by using the key, it can only be checked with an OBD2 scanner. Some auto partsstores like AutoZone and O'reill's will run these tests for free. sgi
You need a code reader, OBD1 they changed to OBD2 in 1996 and newer. you can order one on line, i did for my 93. it hooks up to a plug on the drivers side fender well. It will come with a book of instructions and codes
CHECK OWNERS GUIDE
try autozone.com has online manuals that give step by step how to
You can't. This is an OBD2 compliant vehicle, and as such you will need a scan tool to access the codes.
diagnostic connecter 1995 dodge truckThe diagnostic trouble codes on all models can be extracted from the Powertrain Control Module (PCM) using the (OBD-1) scan tool. The connector is along the wiring harness under the hood, on the firewall on the passenger side.
Scan the computer diagnostic codes using a GM code scanner.
No. I don't know the Taurus, specifically, but the OBD II standard does not provide non-computer access to codes, such as with the older GM CCC system using a jumper.
Using the ignition key, lock and unlock the drivers door. This resets the car alarm which disables the ignition. The car will now start.
type in your keyboard all missions done in grand theft auto 12345678910
Usually diconnecting the battery cable for a few minutes and then reconnecting it will reset the computer That was way back in the old days. Now the computors retain history codes and the only way to clear them is by using a diagnostic computer and only does current codes and not history codes.
disconnect battery, let sit for 5 minutes, reconnect. will reset all codes. check local auto parts store for Haynes manual on how to display codes using ignition key sequence and what the codes stand for
An OBD2 code reader is used by locating the connector under the dash and attaching it to the vehicle. It then reads the diagnostic codes of the engine which can be read or deleted using the control pad.