Take you logbook and 2 forms of id to your local rover dealer they normally charge £20 for this service then they will give you a four digit code this has to be entered via the door lock so it can overide the imobiliser
Usually its in the handbook which comes with the car. Its entered using the ignition key in the drivers door, numbers are entered buy turning it in a direction a given number of times.
Call a locksmith. There is no way to retrieve the code from outside.
coded key, wrong chip code, or key that hasn't been coded. Call a dealer, he will set it up
NCK means network Code key, which can be used to access the network..
Access code generically refers to a password for authorized access to an asset. A WEP key, on the other hand, is the password required for the exchange of encrypted messages among the members of a Wi-Fi network.
Try locking then unlocking the drivers side door hold the key by the lock and press the lock button on the fob 5 times, failing that you need the eka 4-digit code which would be in your handbook, you then turn the lock clockwise and counter clockwise in the sequence of the eka code. Failing all this your Rover dealer will re-programme for around £30.00.
A good locksmith has access to this info, or can get this info from GM. But if you have the key he can read the cuts on the key and give you a key cutting code.
Key tip
Access automatically creates an index for the primary key field in a table. In addition, Access automatically creates an index for any field name that contains the following letter sequences: code, ID, key, or num.
The Live access key is a 16-digit code used to link the game to your Windows Live account. The key can usually be found on the back of your manual or on the inside of the DVD case.
It depends on if all keys are lost or not. I have programmed several land rover keys successfully with my tool which i purchased from http://www.ecutool.com/productshow.asp?id=11272&cso=Autoshop If all keys are lost, you need to delete all keys first; and then add new key. If you have working key, so you just need to add new key directly. Most of Land Rover key programmer tools need the PIN code, but my SKP-100 does not need. Also it could program used keys.
turn the key