Adding Soda Ash can help eleminate foam....acid build up causes it
Try any of the commercial products on the market, normally called Foam Down, or Defoamer etc. They work well, but may not create a permanent fix.
To remove foam from a pool, purchase a defoamer from a pool supply company. It is helpful to know the size of your pool in gallons in order to determine the proper dose. Then, follow the directions on the packaging of defoamer. In the case of foam from vandalism (such as intentionally pouring laundry or dish soap in a pool, spa or fountain) multiple doses may be needed.
In the case of a spa, it may be simpler to drain and fill the spa than to treat the foam.
To prevent foam in pools, do not use soaps for pool cleaning (tile, decking, etc.) and ask bathers to shower prior to entering the pool to remove soaps and oils from the skin.
It depends on the source of the foam.
If the foam is from build up of organics and bather waste in the water then you need to shock the pool and make sure that you are maintaining the FC (Free Chlorine) at the proper level for the CYA (stabilizer), which means you are keeping the FC at about 10%-15% of the CYA. For Example, if your CYA is in the usual 30-50 ppm range then keep the FC at 3-5 ppm (10% of the CYA as a minimum). In a pool with a SWCG (Salt Water Chlorine Generator) Keep the FC at about 5% -7% of the CYA. (80 ppm CYA--FC at 4 ppm minimum.)
If the foam is caused by algaecide (linear quat algaecides form) stop using them and use Polyquat 60 algaecide instead. It is non foaming and longer lasting, which makes up for the higher price. Even better, maintain the FC at the proper percentage of the CYA level as above and you should find that you have no need for algaecide. I would not recommend a copper based algaecide. Copper is effective but it stains pools and is what turns hair (and nails) green! Period!
IF the foam is from detergent or soap added to the pool (and the linear quat algaecides mentioned above ARE detergents--specifically cationic detergents) then time and chlorine should eventually break the down. An enzyme might help speed up the process.
you should drain the pool and wash it out with a hose
I want to know how!
Have never experienced "white balls of foam" in pool. It could be that your filter is dirty and needs cleaning. Or that you have added a certain type of algacide to the pool. Does the foam seem to appear if the water is agitated? Is the foam a dirty brownish color? What are your chemistry levels - chlorine, pH, alkalinity, conditioner? How old is the water in the pool? What is the bather load - how many people at a time? Ken
Suppose you could but who would want to. You possibly have added too much algaecide. Have a dirty filter. Have poor chemistry - out of balance chemically. Too many people in pool. Lack of proper filtration.
Maybe pool return is turned up toward surface to much. That happened to me. Wasn't alot of foam but looked like thin layer of foam. Also resembled shredded toilet paper floating on water.
drain it
if you had lots of algae in your water, then shocked it, it might look that way until the filter can remove all of it, or perhaps if you have a diatomaceous earth filter it is malfunctioning. how can i get rid of the snow? Do you mean foam? Ya gotta be more specific. Just what did you put in the pool prior to this event? Is the water cloudy? What?
No. Boiling water kills bacteria but does not remove most chemicals.
Foam in a pool that uses Baquacil can have a leak in return hose. It can also be the result of putting too much product in the pool. You should check the chemical levels in the pool.
Drink the foam
Remove some or all of the water
Scrub it down with fresh water and a stiff broom or brush
You should remove the antifreeze with a shop vac if possible, antifreeze will not hurt the water, but is just one more thing in the water that you do not need to be there.
The safety of a person swimming in foamy pool water is related to the reason the water is foamy. Chemicals in the pool may not be safe when treating for a time period after added to the water. It is best to ask a person who manages the pool, identify why foam is present, and read all chemical warnings.