Buick
Chevy Tahoe
Door Panels and Handles
Ford Expedition XLT

How do you get the door panel off of a 1982 Buick?

697071

Top Answer
User Avatar
Wiki User
2005-10-05 02:26:02
2005-10-05 02:26:02

well on my 1997 buick you pull a black pin out of the air duckt in the panel...then take out two screws in the arm rest, then you pop out the red light in the door and there is a screw behind there.....then move ur door handle to the open posistion and pop out that plastic molding, then just slide the panel up. im not sure if its the same but im sure that will get you around some of it.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

take the panel off the door, everything is inside

User Avatar

Take your door panel off and replace them...

User Avatar

You have to remove the door panel...not easy, but do-able. Once that is off you can remove the door handle and replace it.

User Avatar

Using a screw driver, remove all of the screws and clips in the door panel, and gently pull the panel away from the frame. Remove any of the wire connectors, and pull the panel off the rest of the way.

User Avatar

remove the door panel, there are 2 bolts that you can get to through holes in the inside steel panel. remove 2 linkages. the handle will then come off from the outside.

User Avatar

Take off all the screws on the door panel.

User Avatar

a steel rod that connects to the door latch handle has fallen off or broken. you will have to remove the door panel and fix what you find

User Avatar

look for screws or bolts holding it on look behind door handle for screw or a bolt if none it should pull off becarfule the clips inside break easy

User Avatar

You have to pull the inside door panel off. Once removed, look for the door latch mechanism and pry it with a screwdriver. This will release the door.

User Avatar

go to the auto parts store and look in the chilton manual for your make and model. it will show you

User Avatar

Removing a door panel from a 1995 Ford Contour is very easy to do. You will need to take the speaker casing off by taking out the two screws. Then you will need to take the clips off that are holding the door panel in place. There will also be two retaining screws to be taken off the door panel with a Phillips screwdriver. After all the screws and clips are off, the door panel can be lifted off.

User Avatar

First you have to unscrew the door handle bezels and remove them from the door panel. Then unbolt the door pull from the door of the car. Next you have to pry the door panel tabs off of the door.

User Avatar

How to take the door panel off a 2002 mercury mountaineer?

User Avatar

Using a screwdriver, remove all the screws from the panel, remove all the clips from the panel, and gently pull the panel from the frame. Remove and wire connectors between the panel and the frame, then pull the panel off the rest of the way.

User Avatar

theres some plastic clips all around the door but you have to remove three screws one on the door handle one behind the reflector on the door and one behind the door handle then you have to wiggle the panel free you will here some noise you have to pry it off try not to break the clips that is not easy to do i broke some the panel still attaches

User Avatar

You first have to remove all the screws from the door. then you should just be able to pull it off. Most car door panels are hanging on by plastic clips.

User Avatar

To remove a door panel from a Renault Clio all the mounting screws need to come off. After all screws have been removed the door panel can be pulled off.

User Avatar

To remove the driver side door panel on a 1992 300E all the mounting screw must be taken off. With the screw off, the remaining clips which hold the door panel need to be gently pried off. After all the hardware is removed the panel can be pulled off the door.

User Avatar

Using a screw driver, remove the screws and remove the clips from the door panel. Remove the panel slowly, remove any wire connections, and pull the panel off the door frame.

User Avatar

Removing a door panel from a 1995 Ford Escort wagon is very simple to do. The clips that are holding the door panel in place need to be removed, then the screws in the door will need to be taken off. After the clips and screws are removed, the door panel can be lifted off.

User Avatar

First, using a screw driver, remove all the screws from the door panel, and unclip all the clips in the door. Next, Pull the panel gently, remove any wire connectors, and pull the panel the rest of the way off.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.