OK, DID MINE LAST WEEKIT TOOK A CROW BAR AND A TORCHLEAVE IN 2 OF THE 4 BOLTS THAT HOLD THE PULLY TO THE WATOR PUMP& TAKE THE BATTERY OUTUSE A LARGE CROW BAR ( MINE IS 4 FEET LONG WITH A,( J )ON ONE END JAM THE BAR BETWEEN ONE OF THE BOLTS AND THAT DAMNED CLUTCH FAN NUTHEAT THE CLUTCH FAN NUT WITH A TORCH AND BEAT YOUR WRENCH WITH A BIG HAMMER TO KNOCK IT LOOSE ( REAL PAIN )OR BUY A $150.00 TOOL FROM Chevrolet!!!!!
chilton book on s10 1997/98 chev y pickup tells one to remove three bolt pulley not the fan pulley lo and behold there is a water pump remove four bolts behind the pulley the water pump is jusy an impellar. the hoses go into the block.very unusual installation.it is not a stupid question to ask for this water pump installation as suggested by chevyb expert.
Remove the 4 nuts that are against the pulley behind the fan with the belt still on the truck. Once these nuts are removed, the fan will separate from the pulley. Now you can remove the belt & water pump pulley.
Why is the water not circulating in my 1995 C1500 Chevy truck?
how to change water pump on a 2005 colorado truck 2.8 eingine
Replace water pump for an 1986 Chevy Nova?
yes just replace the fan clutch assembly
Where is the Water Pump located and how do you replace it on a 1990 Chevy Corsica?
how do I remove the water pump from my 1990 Isuzu truck?
how do you change a pump water on a 2004 Chevy truck k2500 hd
The guy that changed the pump on the 98 Chevy Truck helped me on my 97 Dakota.
Remove the water supply hoses from your 1992 Chevy S 10 pickup truck heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
You will need to replace the intake gaskets to fix your problem. The HEAD GASKETS will not be your problem.
How can do I replace a water pump on a 96 camaro z28
Remove the tail gate then replace water temperature sensor.
my truck leaked as well. I had to take it back several times. It was a bad bead in the front of the cab. they had to do a water test on the truck to find it.
replace water pump 2005 chevy trailblazer vortec 4200
how hard is it to replace a water pump on a 1998 chevy venture van?
Remove engine and transaxle assembly
If there is a rotted hole in the muffler please replace the muffler. However, if there is a small hole at the bottom end of the muffler it is there to allow water to escape.
IT IS THE PART THE FAN IS BOLTED ONTO
Need to know which engine you have.
by a Honda
Remove the belt from your 1999 Chevy Metro water pump. Remove the water pump return hose. Remove the water pump retaining bolts. Reverse the process to replace the water pump.