It depends on the year, make, and model of the vehicle. Most you have to remove the door panel and then remove the linkage and retainer. More information needed for a meaningful answer.
If your drivers side door won't open, try spraying some WD-40 into the area where the door connects with the lock inside the car. This will lubricate the lock.
You have to lock the car with a key. You can't push the lock down with the door open if you have power locks. They do this so that you can't lock your keys in the car.
To take the drivers side lock out of a 1990 4runner you will first need to remove the door cover panel. Once the door cover panel is removed you will have access to the lock and can replace it.
The 2001 Chevy S 10 Blazer power door lock relay switch is located inside of the drivers side door. You will need to remove the drivers side door panel in order to access the door lock relay switch.
Remove the drivers side door panel of your Mercedes-Benz. Remove the door lock assembly retaining bolts. Remove the door lock linkage. The door lock assembly will come off.
On the drivers door armrest has the window lock switch been pressed on the left side ? If it has , then only the drivers door switches operate the power windows . Press the right side of the window lock switch
Check the side of the dash when you open your drivers side door.
inside of the drivers side door
The same way you would on the drivers side....
I think this is a safety measure to keep you from locking your keys in the car. Try locking it with the key after the door is shut.
The 2006 Nissan door lock relay switch is located inside of the drivers side door. You will need to remove the door panel in order to access the door lock relay switch.
You have to lift the handle before you lock the door.