Power Steering
VW Golf
Honda Civic LX

How do you get the power steering belt off of a 1986 VW Golf GL?

121314

Top Answer
User Avatar
Wiki User
Answered
2007-03-19 01:49:59
2007-03-19 01:49:59

Drive the vehicle up on a ramp and look up from undeneath the car. There is a tension adjuster to the belt there. Loosen and remove old belt, replace and readjust for tension.

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


Check the fluid level & pump belt.


A/C Belt Power steering belt. Alternator belt Air pump belt.


The Kia Sedona does not have a power steering belt. The power steering pump is electronic and does not require a belt.


Loosen the tensioner pulley. The power steering belt will come loose. Remove the power steering belt. Reverse the process to install the new power steering belt.


To change a power steering belt on a Rover 214, unbolt the power steering pump and pry the belt off the pulley. Replace with another steering belt and reinstall the steering pump.


Loose power steering belt/worn power steering belt/defective belt tensioner.


Yes, you can expect a car that has a serpentine belt to lose power steering when the belt breaks because the belt goes around the power steering pump's pulley.



on the power steering pump bracket on the side closest to the battery look for a 1/2" square hole (incidently use this with a 1/2'" drive socket wrench to leverage belt tension after you put on the new belt when you get there) just below this square hole is the tension bolt for the power steering belt adjustment


The power steering in a Pulsar is belt driven. Once you locate the power steering belt under the hood, the tensioner will allow removal.


how to change the power steering pump belt on a 1992 jetta


How do you change power steering belt on 2002 kia spectra


check the power steering fluid level and the power steering belt


The power steering pump belt is located on the drivers side of the car. It runs parralell to the alternator / a/c belt, right above it. There is a pulley just above your alternator, the belt on this pulley is your power steering pump belt.


you need to remove the radiator reservoir first. there are two screws you have to loosen on the power steering pump..thats it


As far as I know, the belt is used only for the power steering.


How do you change the power steering belt on a 1996 lexus es300?


The belt drives the power steering, water pump, and other things.


How does one change a power steering belt on a 1997 nissan pickup?


You either need power streering fluid or a power steering belt.


How do you replace power steering belt on 2003 Mazda protege ?1.6


Begin by loosening the tensioner pulley on the front of your 1996 Nissan Maxima engine. Slide the tensioner pulley to the right. The old power steering belt will become loose and can be removed. Put the new power steering belt on. Tighten the power steering belt by sliding the tensioner pulley to the left.


What have to do replace the belts water pump power steering


Yes, if it's connected to your power steering pump.


Power Steering Belt could be loose or worn. Power steering pump could be low on fluid.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.