Also you can cut a piece of a metal hanger bend it into a U and put it into each of the four holes to get it out
You can buy the tool at wal-mart or just go to a car stereo store and see if they will do it for free. The tool looks like a U-shaped piece of wire. Insert these into the holes located on the sides of the radio faceplate, and push them towards the center of the radio, and pull out..it's very simple once you have the right tool.
how do install a radio in my ford thunderbird?
basic answer behind the radio or under the fender behind the plastic
There is a CEL, Check Engine Light, on the 1989 Thunderbird.
in the tank
behind the engine in the transmission tunnel...
35 or 39 PSI
WWW.the12volt.com
The constant power wire for the radio in a 1990 Ford Thunderbird should be green/yellow. The ground wire for this vehicle's stereo system should be black/light green.
Ford Thunderbird was created in 1955.
According to one of Fords websites : For a 1989 Ford Thunderbird , 3.8 liter V6 engine : The spark plugs are gapped at ( .054 inch )
If you have the factory radio and there is a hole in each corner of the radio. You will have to buy a stero removel kit from the store. Walmart has them for around $6.00.
What is the wiring diagram for the car stereo on a 1997 Ford thunder bird