answersLogoWhite
Ask
Mazda Protege
Toyota Camry
Vauxhall
Timing Belts and Chains

How do you get the timing belt off so you can replace the water pump on a Camira JE?

707172
Answer

Top Answer
User Avatar
Wiki User
2015-07-14 14:58:46
2015-07-14 14:58:46

Hi, the pump is held in with three Allen head screws, loosen them then rotate the pump to take the tension out of the timing belt. , Johnno

You want to worry about putting the timing belt back on and getting the timing right before you think about removing the pump ! If your not an experienced DIY, don't do it.

1
0

Related Questions

User Avatar

the water pump is located underneath the timing belt cover and requires that the timing belt be removed in order to replace it as it is driven by the timing belt.

User Avatar

You do not have to change the timing belt to replace the water pump. You do have to remove the timing belt cover to be able to access the bolts that hold the water pump on.

User Avatar

The water pump is located behind the timing belt cover. It is driven by the timing belt. If you decide to replace it, replace the belt and idler pullys at the same time.

User Avatar

water pump on this 3.0 is driven with the timing belt. it is internal water pump you will have to set your timing before you start replace your timing belt if it is worn out.

User Avatar

It is located behind the timing belt. Timing belt must be removed to access the pump. Replace timing belt.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.