Where is brake light fuse for 2004 Ford Explorer located
Defective or out of adjustment brake light switch.
I hate to ask , but did you check the bulbs ? The tail light portion may work fine , but the brake lights don't if both of the bulbs are bad .
Blown fuse or defective brake light switch.
is that even a full question?
Check the bulbs - they are double filamented- smaller for stop and larger for tailights
Brake light fuses location back brake lights
check brake light switch on brake pedal maybe getting bad
To change the brake lights on a 1997 Volkswagen Polo first locate the brake light housings in the trunk. Remove the plastic covers and unlock the bulbs. Remove the bulbs and install the new brake lights.
Could be bad brakelight switch or blown fuse
check the brake light switch. located on the brake pedal it may be bad
change the brake lights check the fuse check the brake light swtch
I'm assuming that one of your brake lights is not working , if this is a message being displayed in your Explorer
What year is the Ford Explorer ? There could be a separate fuse for the lower brake lights
The brake lights are a separate circuit from the other lights. Check the fuses and bulbs. If fuses and bulbs are okay I would suspect the brake light switch is at fault.
Depending on the year, there may be one fuse for all three brake lights, or two fuses, one for the highmount brake light and one fuse for the two lower brake lights/tail lights. So, if all three brake lights are out, it could be just one fuse or perhaps the brake light switch which is on the brake pedal metal arm assembly.
The brake lights are accessed through the rear hatch. Find the panel on the rear sides of the car. Pop out the panel and access the brake lights. Replace the bulbs.
check the brake light switch it might be sticking. located under the dash connected to the brake pedal
Did you check the switch on the brake pedal assembly?
$250.00 just for brake pads
the answer to this is questions is get on the floor
it would be the brake light switch about 20 dollars at autozone
change the fuse if not replace flasher
Working brake lights are important for safety reasons while driving. It is important to check all of the wiring, if the brake lights are not working and the fuses and bulbs have been checked.