get a expert to do it, and youll save half the time. dont do it yourself espicially with glue? Answer You do not need glue to install a windshield
if you mean how is it affixed/how to mount a new one - clean thoroughly, and use the same glue you'd use to mount a rear view to the inside fo the windsheild.
To put a driver's side window back on track on a Ford Expedition you will have to reseat the window. Do this by removing the door panel and putting the window back in place. You can use silicone or Gorilla glue to attach the window. Leave the window in the up position for at least one day once you have it back on place.
If gluing paper to paper, white glue is best.
To put a passenger side window back on track on a Ford Expedition you should first carefully remove any old silicone. Next put the window back on track, and use Gorilla glue or silicone to secure it. Do not put the window down for at least 24 hours.
An epoxy is best for this.
If your window is like my grand am the glue that holds the track and window together is not holding properly, so window keeps coming off track. I have not found a glue that holds yet.
I would use a two part epoxy.
849476049guo4
I have the same problem on my 1998 Ford Expedition XLT. I have put it back on track about 5 times and keeps coming off again and again. I'm going to use the same glue the windshield installers used. I'm going to buy a tube of the glue from them, this will resolve the window from coming off track.
you have to cut the window and use glue and duck tape to hold it
Remove it if you have to for access it is used as a vapor barrier