Ford Expedition Eddie Bauer
Ford Expedition XLT
Ford Explorer Eddie Bauer

How do you hook up 7 plug trailer connector to ford Eddie brauer expedition with 4 plug hookup?

394041

Top Answer
User Avatar
Wiki User
Answered
2011-08-20 23:03:13
2011-08-20 23:03:13

I just have an adapter that i keep in the back of my explorer that goes from a 4 to 7 prong trailer hook up

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


if it has a connector it will be behind the license plate or you have to install one

, If you are referring to installing a connector that you can use for a trailer hookup there should be a connector already installed a taped up under the van, near the left rear wheelhouse. There should be about 6 wires that are also taped up and are "blunt cut", coming from that connector. You will need a schematic of wiring diagram and a trailer connector (with wires) to know how to splice the wires in. Take Care, Greg

Plug in the trailer harness into the 7 pin hookup next to the receive hitch if you have a stock towing package.

The diagnostic connector is under the dash on the driver side.

If you have the towing package it is in the 7 pin blade connector next to your receiver hitch. and that runs back to underneath your dash for brake controller hookup. 2000 Chevy Silverado LT Ext Cab 4 dr 5.3L 4x4 Z71

Look inside the car for a blue connector under the glove box on the passenger side.

Hello The diagnostic hookup is located beside the hood popping lever. It has a cover that you just pop open to access the diagnostic connector where the obdII plugs into. I have a Volvo V70 T5 2001.

Buy a kit at Wal-Mart, auto parts or U-Haul comes with instructions

u can buy one at the auto parts store and they plug into the tail light harness usually buy unpluging it and pluging in the harness

Check your fuses. One is probably blown out. If that is the case you might check the trailer light hookup if you have one.

You will need to hook up your tachometer to the coil connector. After disconnecting the throttle sensor and applying the hand brake, look for the plain black wire at the coil connector to hook it up to.

The diagnostic connector is along the wiring harness, under the hood, on the passenger side firewall.The diagnostic connector is along the wiring harness, under the hood, on the passenger side firewall.

The diagnostic connector is under the hood. It is located along the engine wiring harness.

There is a two wire connector on the passenger side. You can attach it there. You can also go to anyplace like NAPA or Advance and they will do it for you plus tell you what it means.

"Hookup" implies getting together for sex. If that's what you mean, just tell him you really want to hookup.

how to hookup 1998 grand am alternator

You can get a wireless hookup for your laptop with a cellphone company.

There should be a sticker on the side that says freshwater hook up. if that is gone than there should be 2-4 pipes on one and it shud be the far right. Not to sure off the top of my head but its close to the middle depending on how long the trailer is.

There are trailer light kits available on-line that contain an adapter necessary to connect the wiring. The adapter is determined by the make, model and year of your vehicle. Extra lights are also available should you need them. Instructions are available. Also the dealership where you are renting or purchasing your trailer will be able to help you with the hookup.

A gas hookup will have fittings for a gas line, they should be clearly visible. In an electric hookup there will be an electrical plug, but no gas lines showing.

You can get an adapter plug for most Ford and GM trucks that just plugs in to the tail light wiring.

The cast of The Hookup - 2000 includes: Alexis Bledel as herself

It is one cord of a RCA connector (red and white audio cable or a red/white/yellow cable). To hookup my sub woofer from the receiver I separated a red and white cable and just one of them.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.