Acura Legend

How do you install a blower motor for a 93 Acura Legend?


Top Answer
User Avatar
Wiki User
2015-07-15 21:33:57
2015-07-15 21:33:57

remove bottom cover on right side of dashboard, after removal, laying on your back looking up at the bottom of the dash, to your left or passenger side door you will need to remove 2 screws on another cover that will reveal the case containing the blower motor, there are 8 screws to remove on this case to reveal blower motor, after cover is removed there will be 2 screws or 8mm bolts holding the blower motor in place, remove these 2 screws, blower motor will fall into your hands.

Wade sherman Honda and Acura specialist Team62 Racing


Related Questions

User Avatar

The blower motor resister for an Acura Legend drops the voltage to the blower motor. This is what allows the motor to run slower for the medium and low settings.

User Avatar

i had a 1990 acura legend my blower motor was located under the passenger side dash board

User Avatar

The A/C systems blower motor on a 1993 Acura Integra is located behind the glove box on the passenger side of the vehicle. Replacement requires removal of the glovebox, lower passenger dash, and covers. The blower motor is located next to the evaporator, and held by several mounting screws. Just unmount and unplug the blower motor to install the replacement unit.

User Avatar

Possibly the Blower Motor has stopped working. This was the case in my 1994 Acura Legend. I just replaced it, and now the heat works great again!

Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.