Well, first off, whoever took the fender off may know how it goes back on. You can try and line it up and figure out where all the bolts go. If that doesnt work then go to an auto parts store and buy the manual from haynes or something, that will tell you how pretty much everything goes together.
Replace axle on 2001 buick Lesabre
Whats the procedure for replacing a 2002 Buick Lesabre front strut.?
front left fender under black cover,make sure to unhook battery cable first.
118 ft lbs 1997-2004 Buick LeSabre
AnswerFront or rear?front
Front wheel drive
97 buick lesabre are front wheel drive
No they are not, 1985 is rear wheel drive & 86 on is front wheel drive.
The 2000 Buick LeSabre front grill is held in place with eight retaining bolts. Remove the retaining bolts and the front grill will come off.
Depinding on the width of both the tire and rim. My 97 buick lesabre has 22s on it and the back tires rub when I hit a bump due to the lip of the fender. May need a fender lip roller tool for the rear. The front should be fine.
Most likely not. Buick changed the front end design on the LeSabre in 1997. They are probably a completely different hood.
how do you install front fog lens on a 2000 buick regal
In front of the left rear tire.
On my 98 buick LeSabre the fuel filter was under the car passenger side just in front of the rear tire.Good luck!
I am pretty sure they are 6x9
its in the book owners manual
97 buick lesabre center front wheel bolt size
The way that replace a window regulator in a 2003 Buick LeSabre front drive side is by removing the door panel. Next, disconnect the electrical connector on the regulator and replace.