Ford Ranger
Thermostats

How do you install a thermostat on a 1992 Ford Ranger XLT?

585960

Top Answer
User Avatar
Wiki User
2015-07-15 19:55:32
2015-07-15 19:55:32

On the 4 cyl models the thermostat housing is located just above the water pump and is bolted to the enging block. Just follow the upper radiator hose to the engine from the radiator. On the 6 cyl models the thermostat housing is located at the top front-middle of the engine at the front of the intake manifold. Follow the upper radiator hose. Unbolt the thermostat housing Clean the mating surfaces and Re-Install a new stat using gasket sealer with the copper pellet end of the thermostat facing in towards the engine.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

The 1992 Ford Ranger 4.0 liter had a 197 * Fahrenheit thermostat from the factory

User Avatar

There is supposed to be an engine thermostat . Do you mean that someone has removed the engine thermostat ? What year of Ford Ranger and what year ?

User Avatar

install ignition 2002 ford ranger directions

User Avatar

The thermostat on a 1984 ranger is located in the lower radiator hose housing connected to the engine, not the top like most vehicles..Fairly easy to replace. Just remove the bolts.. then the housing and the thermostat.

User Avatar

The thermostat is done it has to be replaced.......

User Avatar

How do you install a rear sliding window on a 2000 Ford Ranger?

User Avatar

where is fuel filter located on a 1992 ford ranger

User Avatar

Where is the oil pressure sending unit on 1992 ford ranger

User Avatar

I need to know how to install a headlight swith in a 1991 ford ranger xlt

User Avatar

how to install Ford Ranger Driver Side View Mirror

User Avatar

do you have to remove fan shroud to access thermostat housing on a 1997 2.3L ford ranger

User Avatar

What is a a/cl dv on a 1992 ford ranger xlt vacuum line

User Avatar

how to change a tie rod on a 1992 ford ranger xlt

User Avatar

Usually no, but you can install them yourself or get a shop to install it.

User Avatar

The 1992 Ford Ranger ICM is located on the firewall in the engine compartment. The ICM will be on the drivers side of the firewall.

User Avatar

A 1992 Ford Ranger is fuel injected so it would have an ELECTRIC fuel pump

User Avatar

Thermostats require no lubricant.

User Avatar

Remove the 2 bolts at the thermostat housing. The upper hose goes to the thermostat housing.

User Avatar

The thermostat, in your 2003 Ford Escape, by removing the water hose and the 3 bolts from the thermostat housing. The thermostat will easily come out. Reverse the process to install the new thermostat.

User Avatar

The diagram of the thermostat location can be found in the 2000 ford ranger service manual. The manual might be available at the library, and can be bought through the local auto parts store.

User Avatar

I need a picture diagram for a 1997 Ford Ranger engine so I can locate where the thermostat is? Please help!!!

User Avatar

I own a 1992 ford ranger, 300c.i. v-6 and it is fuel injected.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.