answersLogoWhite

0

Starters and Ignition Systems
Ford Explorer Eddie Bauer
Ford Explorer XLT

How do you install an ignition control module in a 2001 Cavalier?


Top Answer
User Avatar
Wiki User
Answered 2008-06-02 01:39:44

Unplug the two wire connectors located above the ignition coils (one has two wires the other larger one has three wires, usually) remove the two ignition coils (4 X 5.5mm bolts). The module is located under the two coils (the coils plug directly into the module).

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Loading...

Still have questions?

Related Questions

Where is the ignition control module 1997 Chevy cavalier 2.2 L?

where is the ignition control module loacted on a 1997 chevy cavalier


How do you change the Ignition Control Module in a 1995 Blazer S-10?

Remove the wiring harness from your 1995 Chevy Blazer ignition control module. Remove the ignition control module retaining screws. Reverse the process to install your new ignition control module.


Where is the ignition control module for 1997 Chevy Cavalier 2.4L?

The ignition control module is located under the electronic ignition control module cover. On a 1997 2.4L cavalier, it will have the words 2.4L twin cam stamped on it. It is on the top of the engine and is held in place with four bolts. This cover must be removed to get to the spark plugs.


Where is the ignition control module located in a 1995 cavalier and how do you wire it?

ignition control module on a 95 cavalier is locate on rear of engine facing fire wall. Attached by 2 bolts and has a snap connector. Best to have very small hands or drop engine to replace


What could cause a Chevrolet Cavalier to stop running suddenly?

sounds like the ignition control module


What is a ignition control module?

the ignition control module is operated by the pcm,the pcm tells the ignition control module when to energize the coils to enable spark


How do you install a electronic ignition control module?

The electronic ignition control module on an automobile is installed by first locating the unit at the top of the engine. The wiring harness is then disconnected from the original unit an a new module put in its place.


Where is the ignition control module on a 1994 aerostar?

The 1994 Ford Aerostar ignition control module is located on the firewall in the engine compartment. The ignition control module will be on the drivers side of the firewall.


Where is the location of the ignition control module on a Ford Focus?

You can find the Ford Focus ignition control module beneath the drivers side dashboard. The ignition control module will be above the accelerator pedal.


Where is the ignition control module in a 1997 mercury villager?

The ignition control module sit directly below the distributor.


Where is the ignition control module on a 1992 Crown Vic?

Where is the ignition control module located in my 1992 Crown Victoria


Where is the control module located on the 1991 Chevy Cavalier?

Not knowing what module, the ignition control module is behind the coil packs. 3 bolts hold all together against block, under the intake lower to mid center U


Where is the ignition module on a 88 tracer?

ignition control module is under the distributor cap


Were is the ignition control module on a 2001 Mercury Sable 3.0 dohc?

Where is ignition control module on a 2001 mercury sable


Where is the ignition control module on a 97 explorer sohc?

Only the EEC-IV ignition systems ( 1991 to 1995) use an external ICM (ignition control module) . From 1996 on with the EEC-V system the ignition control module is incorperated into the power control module (PCM) mounted in your firewall on the passenger side.


Where is ignition control module located on 1989 Chevy cavalier z24?

Behind the coil pack in the front lower center part of the engine.


Where can i get ignition control module for Mercedes Benz 300SE?

A Mercedes-Benz 300SE ignition control module can be obtained from most Mercedes-Benz dealerships. The ignition control module, can be purchased at most auto-parts stores.


Where is the wcm on a 2006 dodge magnum?

The ignition switch is part of the WCM (wireless control module).The ignition switch is part of the WCM (wireless control module).


How do i change the ignition module in a 1998 suburban?

Begin by removing the wiring harness from your 1998 Chevrolet Suburban ignition module. Remove the ignition module retaining screws. Reverse the process to install your new ignition module.


Where is the ignition and distributor located on a 1990 Chevy Celebrity?

The 1990 Chevy Celebrity engine is distributorless, the ignition is handled by a combination of the engine control module(computer) and the ignition control module. You did not mention which engine the car has. If your car has the 4 cylinder engine the ignition control module is below the intake manifold at the rear of the engine. You can follow the spark plug wires to it. The coils are mounted to the ignition control module. If your car has the V6 the ignition control module is near the starter and again you can follow the spark plug wires to it. Again the coils are mounted to the ignition control module.


How do you change ignition control module 1995 Buick Riviera?

Disconnect the battery. Remove the ignition coils. Remove the ignition control module that was under the coils, and replace it.


How do you replace ignition module in a 98' Malibu?

Remove the ignition module retaining ring. Pull the ignition barrel out. Remove the wiring harness from the back of the ignition barrel. Reverse the process to install the new ignition module.


Where is the ignition module on a 1995 Pontiac transport?

where is the ignition control module on a 1995 Pontiac Transport and how do i replace it


How do you change the ignition control module on 1996 mercury cougar xr7?

there is no ignition control module on the 1996 model its all through the PCM


Where is ignition control module in 99 Honda accord?

The Ignition Control Module on the 4 cyl models is located under the Distributor cap.