0
engine will cut out at any time. will usually start again. but will cut out again when it wants to
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Where the cam sensor?
We need to know the year, make, model and engine to help you.
How do you know the cam sensor is bad?
how do you k now the cam sensor is bad
Will 92 park avenue start with bad cam sensor?
No it will not start need to change the cam sensor & crank sensor!
Do you need to replace cam sensor after replacing the crank sensor?
if you have a code w/ cam to crank reference then yes. if only a crank sensor issue the no
Does a 1988 Chevy suburban have a camshaft position sensor?
No it does not. It has a distributor no need for a cam sensor.
Where is camshaft position sensor 1999 pathfinder?
I would like to know where the cam sensor is on a 1999 pathfinder and is there one or they calling it a crank shaft sensor The cam shaft position sensor is located in the distributor.
95 Chrysler cirrus V6 won't start where is the cam sensor?
It is a non serviceable part of the distributor. The distributor will need replaced if the cam sensor has failed.
How do you replace the cam position sensor in a 1997 Ford F-150 pickup with 6 cylinder engine?
We need to know what engine you have to answer this question.
Does a Chevrolet 2.2 have a cam position sensor?
The 94 and 95 are the same,no cam sensor.1996 and 1997 are differant in one way.The 1996 and 1997 have a cam sensor. .The 97 has a cam sensor and the 94 does not.The 1996 has a cam sensor too.
Where is your cam sensor on your Ford Probe gt?
the camshaft sensor is located in the distributor. you need to purchase the entire distibutor to replace the sensor.
Need to know where cam or crank sensor is located on 2002 Chevy trailblazer?
cam position sensor is located on the top lest of the engine just behind power steering pump you will have to take the pump off to slide it out of the engine once you remove its mounting bolt
Where is the cam sensor located on a 6.0l ford power stroke diesel?
cam sensor on a diesel??????????????????? yes cam sensor on a diesel. a diesel still has valves that are opened by a camshaft to allow air in and out of the combustion chambers, and it's necessary for injector timing to know what position the cam is in. 7.3L cam sensor is located at the front of the engine just above the harmonic balancer. (this sensor is often replaced if you have a p0344 or p0340 code.) very easy to change, you just need a 10mm socket preferably 1/4" drive and a long flat blade screwdriver. 6.0L cam sensor is located on the drivers (LH) side of the engine block near the front of the engine. The 6.0 cam sensor is behind the power steering pump. You need to remove the belt and the p.s. pump bolts and swing the pump away from the block. This will expose the cam sensor(which is about 5 inches long) and it's 10 mm bolt, after which you can pull the sensor from the block.
