I was told to have #1 and #2 cyelenders up and have the marks on the camshafts strait up im not sure if this is true.
if its the turbo model when i did mine once i removed the casings you will see the notches on the pulleys and they all line up with the notches in the back plastics,buy a manual disc off eBay you will see wot i mean.
A 2004 Subaru Impreza WRX STI, which is the top of the line Impreza from Subaru.
how do you line up the timing marks 2.3 jtd
line up the marks on the belt to the marks on the timing wheels
Timing marks are on the top of the timing gear rear cover. With the cover off, these marks will line up with the timing marks on the intake and exhaust gears when the crankshaft gear timing mark faces down to its mark at the bottom. Good luck!
timing are marks are on the cam and cranshaft pulleys all u need to do is line the marks up timing are marks are on the cam and cranshaft pulleys all u need to do is line the marks up
The timing marks are on the crank pulley and oil pan. You have to line them up and also line your cams up.
The timing marks on a 1969 Ford 360 should line up between the timing chain and the cam sprocket. This sets the initial timing which can later be adjusted using a timing light.
The timing chain has plated links that line up with marks on the sprockets.The timing chain has plated links that line up with marks on the sprockets.
the timing marks are on the crankshaft pulley and camshaft pulley.make sure they line up with the marks behind them on the relevant part of engine you are looking at.
need to know how to set the timing marks on a 1993 Geo Metro?
On your top and bottom pulleys ,you have timing marks,they should line up when time is correct.
The sprockets have marks that line up with marks on the case.
How do timing marks line up on 2.5 S's Nissan altima 2002
Timing marks? There is a timing mark on the main crankshaft pulley as well as marks on the timing belt cover to line it up with. There is also marks on the cam gear, with the #1 and that arrow being most important, as well as an arrow or other mark on the cylinder head to line it up with. All of these need to line up in order for the timing to be correct. Then the distributor can be moved left or right to fine tune the timing to spec.. -Shaun
The timing marks on a 1997 Suzuki Esteem is on the crankshaft pulley. The crank mark needs to line up with the ignition timing mark.
clean on the front of the pump on top where it bolts on the motor there are timing marks there line up the long marks to set the timing.
the timing marks are on the rear of the engine @ the top of the transmission bell housing,use the mark on the flywheel & pointer on the bell housing to line up the timing marks.
were are the time marks on the gears thank you clive
How do i line up yhe timing marks on a 1995 kia spotage. please send a diagram at email@example.com
Line up the marks on the gears with the off colored links on the timing chain.
line up the timing marks on the flywheel and cam
If you are asking about timing gears with a belt system, you have to line the timing marks up with the marks on the gears. If you want to know about chain gear alignment please re-ask with vehicle specifics and I can answer that also.
Remove electric fans Remove timing belt covers Get belt from Subaru (don't use aftermarket belts) Line marks on belt up with marks on crank and cam pulleys Turn engine over by hand two rotations Make sure marks still line up Reassemble While you're in there, good idea to replace the cam and crank seals It's not an easy job, and is best left to a qualified certified Subaru techncian unless you are mechanically inclined (I'd recommend at least getting an owner's workshop manual before attempting it) For a more in-depth guide, see www.subaru-svx.net
The marks on the sprockets line up with plated links on the chain.
If the marks on the sprockets line up with the plated links, the timing is correct.