answersLogoWhite

0


Best Answer

5 millimolar (5 thousandths of a mole per liter) is equal to 5000 micromolar ( 5000 millionths of a mole per liter). To make a 50 micromolar solution from 5 millimolar stock solution, you therefore need 5000/50 = 100 fold dilution.

Remove a 10 ml aliquot of stock and transfer to a 1000ml (1 liter) volumetric flask. Dilute with the solvent -usually water, and fill up to the graduation mark. You will now have 1 liter (1000 ml) of 50 micromolar solution.

User Avatar

Wiki User

10y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

10y ago

- Divide the molar mass of the compound with 1 000 000.

- Multiply with 200.

- Weigh this mass if it is possible; alternatively obtain this mass from a stock solution.

- Dissolve this compound in 1 L of demineralized water.

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

Dissolve 2ml from stock in 8ml of diluent.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

take 1ml from stock solution and dilute to 10ml of water to get 10 micromolar solution

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

dilute it twofold. this means if you choose a 100ml volumetric, take 50ml of your stock and fill it to the mark (another 50ml) with solvent

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

Any dilution of 100,000 (= 1,000,000 / 10) will do, eg. 1 mL added up to 100 L.

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

The easiest way would be to take a 25 ml aliquot of the 50 micromolar solution with a pipette and transfer to a 50 ml volumetric flask and then make up to the mark with distilled water.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you make a 10 micromolar solution from a 100 micromolar stock solution?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you make 600 mL of a 1 molar solution of HCl using a 6 molar stock solution?

combine 100 mL 6 M HCl with 500 mL H2O


How do you make 100 ppm solution?

7


How do you make 0.3 percent Triton X-100?

triton x-100 stock percent? 100% ?


How do you make a potassium thiocynate solution?

When you are looking to make a potassium thicyanate solution you have to dissolve 0.972 g of KSCN in enough H2O to make a 100 mL solution.


How do you prepare 5mg percent working uric acid standard solution from stock uric acid standard solution?

Preparation of standards Prepare a stock uric acid solution of 100 mg/L. Dilute it to give working concentrations of 10, 20, 30, 40, 50 and 60 mg/L. Procedure:1 Prepare a 100 mg/L stock solution of uric acid Weigh out 100 mg uric acid, transfer it to a 1 L volumetric flash, add about 900 ml distilled water, and then add about 100 µl of 0.6 N NaOH to help dissolve the uric acid. Make up to the volume with water when uric acid is fully dissolved.2 Dilute the stock solution to give working concentrations of 10, 20, 30, 40, 50, 60 mg/L. To prepare 50 ml of the working standards 5, 10, 20, 30, 40, 50 mg/L respectively, weigh 10, 15, 20, 25, 30 g of stock solution into 50 ml volumetric flasks and make up to volume with distilled water.


How do you make 1 solution phenolphthalein?

just took 0.1g phenolphathlein in 50ml of ethyl alcohol and make the solution up to 100 ml


How much CuSO4.5H2O is required to prepare 100mL of a 0.050 M aqueous stock solution?

RMM of CuSo4 . 5H2O = 160 + 5x18 = 250 g How much contain gram in 100 mL of 0.050 M CuSO4 solution is - Solution: = 0.050 x 100/1000 x 250 = 0.050x4 (100)/ 16 = 1.25 g


How do you make potassium thiocyanite solution?

To make a potassium thiocyanate solution, dissolve 0.972 g potassium thiocyanate (KSCN) in enough water to make 100 ml.


How many cubic centimetres of solution of concentration 100 mg Co2 plus per cubic centimetre are needed to prepare 1.5 L of solution of concentration 20 mg Co2 plus per cubic centimetre?

If i understand the question correctly, basically you want to make your standard 1/5 the conc of the stock. Therefore, 300ml stock diluted up with solvent


How much 25 mg by ml solution can you make by diluting 120 ml of a 100 mg by ml solution?

480ml


How do you make a 0.1 molar solution if you had a 1.0 molar solution to start with?

100 mL of solution 1 M mixed with 900 mL distilled water


How much methanol needed to make 100 ppm solution in 100ml water?

100ppm means, you need 100mg in 1oooml. Thus, for 100ml solution, you will need 10mg of methanol to make 100ppm solution.