How do you make a toy parachute?

Answer 1

all you have to do is Tye a sting to each corner and then Tye it to an object

Answer 2

How to Make a Toy ParachuteEdited by Tifa Liu, Flickety, Mercedes, Khbirder and 92 others50

Article Edit Discuss

You just never know when you're going to need to toss an egg or a toy soldier into the air, and have it land safely. For those times, you will need a little toy parachute. Here's how to make one.

Steps

1. 1

   Make the canopy. Cut out an 16 inch (40 cm) hexagon out of a heavy-duty trash bag or paper grocery bag.

2. 2

   Make holes for the lines. With a paper punch, scissors, or hobby knife, cut small holes near the point of each of the 6 corners of the hexagon.

   • Don't get too near the point when you make your holes, or your 'chute could fail, sending GI Joe plummeting.
3. 3

   Attach the lines. Cut 6 16 to 20-inch pieces of string, slide the end of each string through the holes, and tie them to the parachute securely.

   • Number the strings. Starting at the top, and going around clockwise, number each string from 1 to 6. You can use a sharpie to write the number on the parachute.
4. 4

   Build the holder. For your parachute to work, you need to have a weight at the bottom. You can tie the strings to a washer, or you can attach a small paper or plastic cup and put whatever you like inside. We'll use a large washer to illustrate this example.

5. 5

   Mark the washer. Using your sharpie, write the numbers 1 to 6 clockwise around the washer, so that they match the numbers on the chute.

   • If you're using a cup, do the same around the outside top edge of the cup, and make a small hole next to each number.
6. 6

   Tie the lines. Take a line from the chute and tie it to the matching number on the washer.

7. 7

   Repeat for all 6 lines.

8. 8

   Make sure that there are no twists or tangles in the strings. If there are, untie one string and take out the tangle.

9. 9

   Try it out. After your toy parachute is finished, you could go upstairs to the veranda or balcony, and drop it to see your creation at work! You can put a small doll, toy army man, ball, egg, or anything you want into the cup as a "passenger," as long as it isn't too big or too heavy. You don't want it crashing to the ground and breaking things. After dropping it, you could rush downstairs or to the yard to see where and how the parachute has landed. Enjoy!

Answer 3

Material that we need are :

Paper

Scissor

Glue

4 Thread

1st Step:

Cut a paper to form a parachute.

2nd Step:

Make it curve

3rd Step:

Make a 4 hole to the parachute

4th Step:

Put each thread to the hole that you make

5th Step:

Than Cut a paper until it form a person/human

6th Step:

Glue the Thread to the human's Hand

7th Step:

Drop the Parachute

8th Step:

DONE!

I think it will success but i don't know:|

Answer 4

Get a woman's scarf or handkerchief made out of polyester.

Answer 5

Throw the parachute as high as you can.