0
How do you make sure camshafts valves are in right position with crankshaft if timing chain broke on 2.7 liter Dodge Intrepid 2001?
Wiki User
∙ 14y ago
There are marks on both the cam mounted gears and the crankshaft. The problem is that the 2.7 engine is an interference engine which means the valves will hit the pistons if it is out of time, when your belt broke it most likely bent some valves. The best thing to do is replace the engine with a 3.2 or 3.5, if you can find a 2.7 that is good you can do that but future issues can return do to poor design of that engine.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where is the oil pump in a dodge intrepid?
On the front of the crankshaft, under the timing covers.On the front of the crankshaft, under the timing covers.
Ihave a 2001 daewoo nebria replaced the head but cant get it to start?
check the timing position the dash marks of both camshafts should be on one line while the mark of the crankshaft in the right position >
Where are the timing marks on the camshafts and crankshaft of Mercedes Benz c180?
i need timing marks of merc c180 kompresser diagramatically if possible.thank you
Is a timing belt and serpentine belt the same on a 1997 Dodge Caravan?
No. The timing belt or chain connects to crankshaft and camshafts. The serpentine belt connects the crankshaft with the alternator, ac compressor, power steering, etc.
Does a 2003 Dodge Ram 4.7L have a timing belt or chain?
Chain, it has 3 2 go to camshafts 1 to crankshaft
What is the timing chain ratio for 1997 v6 Ford F-150?
In general Camshafts turn 1/2 the speed of the crankshaft.
What is the crankshaft sensor on a 1995 Chrysler Concorde?
The crankshaft position sensor measures the rotational position of the crankshaft for the engine computer. That info is required for fuel and ignition timing.The crankshaft position sensor measures the rotational position of the crankshaft for the engine computer. That info is required for fuel and ignition timing.
Does a 2005 Nissan Quest timing belt or chain?
A 2005 Nissan Quest has a timing belt which syncs the camshafts and crankshaft. Older vehicles used a timing chain which was more prone to stretching.
How do you locate the timing marks on a timing chain for 2000 Saturn ls2?
The LS2 uses the Ecotech V6 engine, and as such does not have a timing chain; instead, it uses a timing belt. The camshafts (4) and crankshaft are held in position by a special set of tools designed just for that job. Do not attempt to replace the timing belt without the set of specialized clamps.
Where the crankshaft position sensor is located on 2005 Kia Sedona?
The crankshaft position sensor is located behind the timing cover and above the crankshaft gear. the timing belt my have to be removed to access the bolts on the sensor.
Where is 3.3 intrepid oil pump located?
The oil pump is in the timing cover and is driven off of the crankshaft snout. You have to remove the timing cover to replace it.
Timing belt Mitsubishi mirage?
The timing belt on a Mitsubishi Mirage connects the camshafts with the crankshaft. This ensures that each valve is opened at precisely the right time based on the rotation of the engine.
