take the belt off, remove the three bolts by turning the pulley (there are three holes in it to see the bolts), then you can get to the camshaft sensor.
The Camshaft Position Sensor is located behind the Power Steering Pump.
it is located behind the power steering pump. You need to remove the power steering pump and the rest is self explanatory.
camshaft sensor is under power steering pump. remove steering pump, then set aside do not remove hoses. sensor is down, remove one bolt that holds sensor in, then pull up on sensor to remove.
The camshaft position sensor is right under the power steering pump. Remove the power steering pump to access the sensor.
change camshaft sensor,it is under power steering pump. remove pump, but do not remove any hoses. set pump aside and sensor is reachable. take out bolt holding sensor then pull sensor out of engine.
Do you have the 3.4l or 2.4l engine, the camshaft position sensor for the v6(3.4l) is located under the power steering pump
The camshaft position sensor on a 2001 ford mustang is located on the front of the engine. It is behind the power steering fluid reservoir.
if you do it yourself,you only pay for sensor!! to change sensor on a v6, remove power steering pump and set aside do not remove hoses,sensor is under pump!! remove hold down bolt then wiggle it out!!
I only know of 1 cam sensor on the 3.1! it is under power steering pump. remove pump, do not take off hoses just set it aside. now you can see sensor, remove bolt that holds sensor, and remove sensor by pulling straight up.
it is located behind the power steering pump. You need to remove the power steering pump to get to it which requires removing the engine mount next to it to get the bottom bolt out of the power steering pump. The sensor is directly behind the power steering pump. You can follow the cable that goes behind the pump. It is the only one there.
Where is the camshaft position sensor on a 2005 Expedition?
The 1995 for Crown Victoria camshaft position sensor can be found on the back of the cylinder head. The camshaft position sensor will be labeled as such.