The best way to to try to find the cable and cut it and pull with pliers to open if the inside latch is broken. If not then you would have to go in from underneath or through the grill.
Use a set of pliers to pull the cable even if the plastic latch is broken...
dodge truck broken hood latch
To open the hood latch on a 1996 Buick Park Avenue, the car needs to be put up on a hoist or jacked up. Then a long pole is needed to trip the hood latch. The cable can then be repaired for the hood latch before it is closed again.
I had problems with my hood latch on a 1993 Le Sabre. My mechanic showed me how to open the hood. Pull the lever back just enough to pop the latch. Do not pull the lever any further than that or it will not work. Once you get the hang of it you will have no problems. Good luck.
Most likely not. Buick changed the front end design on the LeSabre in 1997. They are probably a completely different hood.
i believe so because they are the same body style
Pull hood latch and then go to front of car and hit front center of hood with fist. If this does not work you can drive car nto a curb while holding hood latch in open position, this should make hood pop open.
With a pair of pliers pulling the latch.
That depends on a few things. If the cable has broken at the release handle, you can use Vice Grips or pliers to grab the end of the cable and pull. If the hood is stuck down you can have a helper pull up on the hood while you work the release in the car. If the cable has broken at the latch consult a pro for help. If you get a helper to hold the the hood release open on the inside and tap lightly, with the side of your fist, on the front of your hood just above the grill. This will usually work if the cable is not broken.
The fuel pump relay on a 1996 Buick LeSabre can be found underneath the hood. The fuse will be in the fuse box.
it is next to drivers side on floor in front, take pliers and pull up on cable, this will release hood latch
under hood left side