The hood release lever is located below the instrument panel in front of the driver's side door. Raise the hood, and use the latch to hold the hood up.
Open the hood. Filter is on the lower right front
There's a hood release on the drivers side near the floor by the door. There's a latch under the hood in the middle.
I really don't think there is a hood open warning.
Depends what year you have. Mine's an 02. In mine, the hood release is on the driver's side near the floor at the base of the door frame. After you pull that latch you have to release another latch which is actually under the hood itself. On my 02 the second latch is right under the front of the hood just about where the J is on the JEEP logo on the hood.
Hood prop
I just pops out
Open the driver door and look on the side of the dash. You can pull out the panel and get to the fuses there. There are also some fuses under the hood, depends what you fuse you need to get to.
Open the driver door and look on the side of the dash. You can pull out the panel and get to the fuses there. There are also some fuses under the hood, depends what you fuse you need to get to.
It's right under the Jeep logo on the lift gate.
Open the engine hood and you will see 4 screws along the top edge of the grill , unscrew and remove grill , the bottom is held in with taps that fit in slots
Look for the hood release on the left kick panel below the dash, in front of, and to the left of the driver's seat. Pull back on it, and go to the front of the hood and slide the safety catch to open position while lifting the hood. The hood is supported by hydraulic struts, so no metal support rod is necessary.
It is directly behind the steering column; when you open the hood, it is in the far back right attached to the firewall. it is about 10 inches in diameter and has a reservoir attached to it, very hard to miss.