How do you operate cruise control on a 2003 Chevy Blazer?

Answer 1

The cruise control switch should be on the turn signal control arm. There is a three position switch; off, on and resume are the three positions; "off" to your left, "resume" to the right and "on" in the center when you are sitting in the drivers seat looking at the switch. The switch needs to be in the on position and when you reach the speed you wish to "cruise" push and briefly hold in the button on the end of the turn signal control arm; the "set" button. This should engage the cruise control, to accelerate you can push the three position switch to the resume position until you have reached the speed you want to change to and to decelerate you can push the set button. Do not relase the resume switch to quickly, it is a spring loaded position, a momentary switch, and the spring may have enough strength to push the switch past the on position to the off position if released quickly. The resume can be used to return to a set speed after braking or clutching as touching the brakes or the clutch if a manual transmission model will disengage the cruise control. Hope this helps.