You don't. The receptacles accept different shaped plugs to stop people from doing this. If you did somehow rig it up to fit, you would most definitely damage or destroy the object plugged in.
If the appliance has a safety certification - such as a UL Listing, it is rated to operate from 110 - 125 volts AC, which are typical values in the U.S.
Assuming the plug configuration, the physical fit, is the same - just plug it in. the voltage difference is within what the equipment can handle.
If your trying to plug in a 110 Volt lamp into 240 volt outlet the answer is simple. You must buy a step down transformer, or your lamp will burn out.
If I understand your question, Can you run a 110 appliance off of a 220 volt outlet? You could by only using one leg of the 220. You may also consider changing the outlet. Put in a regular 110 outlet and capping off one leg of the 220 in the wall box. You still have a neutral and a ground to work with. I read this as the questioner doesn't want to modify the outlet. Check the voltage ratings on the device. Many electronic devices nowadays can havdle 120V or 240V as it is cheaper to manufacture one powersupply and sell it everywhere. If your device is rated for 240V, you can put a 240V plug on it. If it only says 120V, no dice. 240V will burn it up.
No, a cigarette lighter plug cannot be replaced with a regular outlet plug. These two types of plugs have different voltage ratings and designs. A cigarette lighter plug is designed to fit into a car's 12-volt DC socket, while a regular outlet plug is designed for use with household AC outlets.
What is your question? A standard outlet is 110V. A 220 outlet is shaped different so that you know it is 220. You would never run 220 through a 110 outlet.
Yes, assuming the wall outlet produces 120V 60 Hz at at least 4 watts.
Nominally 110 to 120 volt power strip is okay to connect to a standard outlet.
If your trying to plug in a 110 Volt lamp into 240 volt outlet the answer is simple. You must buy a step down transformer, or your lamp will burn out.
no
Not unless you have a 110 volt supply to plug it in to. The standard General Power Outlet in Australia is 240 volts AC at 50 Hertz.
A previous member answered: "No. You will need a step up transformer to be able to use 110v appliances in 100v sockets." This is incorrect. In the US, the AC supplied to household outlets may be called 100, 110, 0r 120 Volts. These all refer to the U.S. nominal 110 Volt supply, which can range from as low as 95 volts and as high as 125 volts and most appliances labeled for 110 Volts may be used in the socket. Generally, if the plug fits, it's safe.
If I understand your question, Can you run a 110 appliance off of a 220 volt outlet? You could by only using one leg of the 220. You may also consider changing the outlet. Put in a regular 110 outlet and capping off one leg of the 220 in the wall box. You still have a neutral and a ground to work with. I read this as the questioner doesn't want to modify the outlet. Check the voltage ratings on the device. Many electronic devices nowadays can havdle 120V or 240V as it is cheaper to manufacture one powersupply and sell it everywhere. If your device is rated for 240V, you can put a 240V plug on it. If it only says 120V, no dice. 240V will burn it up.
NO, unless you get a converter that converts 220 to 110.
Not unless you have a 110 volt supply to plug it in to. The standard General Power Outlet in Australia is 240 volts AC at 50 Hertz.
In a United States 110/120V household outlet (also known as an Edison plug) the ground contact is the one shaped like a train tunnel, usually located at the bottom. The hot and neutral wires are the two shaped like slits.
Yes.
15 amps
No, a cigarette lighter plug cannot be replaced with a regular outlet plug. These two types of plugs have different voltage ratings and designs. A cigarette lighter plug is designed to fit into a car's 12-volt DC socket, while a regular outlet plug is designed for use with household AC outlets.