titrate water with standard soap solution .End point is when floating bubbles aee stable
To prepare a dilute solution.
cresol is prepared with soap solution as it is more soluble in the soap solution than water . moreover soap solution enhances its detergent and disinfectant properties.
Hardness in water is usually characterised as temporary or permanent. Both are due to the presence of calcium or magnesium ions. If they are present as the hydrogen carbonate, when the water is boiled this is converted to the carbonate which precipitates out as a solid, leaving water which is no longer hard, so this is called temporary hardness. If they are present as the sulfate the solution is unaffected by boiling, and this is called permanent hardness.
You prepare a solution by dissolving a known mass of solute into a specific amount of solvent. In solutions, M is the molarity, or moles of solute per liter of solution. For 300 ml of a 0.1 M Na CL solution from a solid Na CL solution and water you need water and sodium chloride.
Dissolve 30-40 g of sodium chloride in 1 L of water.
The water supplier can provide you the details on hardness level if you are on municipal water systems, If you are using private water then you can get tested in laboratories. You can even measure it with water hardness testing kits which you need to purchase.
To prepare a dilute solution.
Image result for You prepare a less concentrated H C l solution from a stock solution with 12m concentration. If you too 100g of the stock solution to prepare 4 MHCl solution how much water is needed to prepare o find solution 9density HCL(12) = 1,89/ml? The concentration would be 0.76 mol/L.
cresol is prepared with soap solution as it is more soluble in the soap solution than water . moreover soap solution enhances its detergent and disinfectant properties.
pharmacist
1 % DCPIP solution can be prepared by dissolving 1g of the dye in 100cm3 of water
Hardness in water is usually characterised as temporary or permanent. Both are due to the presence of calcium or magnesium ions. If they are present as the hydrogen carbonate, when the water is boiled this is converted to the carbonate which precipitates out as a solid, leaving water which is no longer hard, so this is called temporary hardness. If they are present as the sulfate the solution is unaffected by boiling, and this is called permanent hardness.
If the calcium is a result of pool chemicals, draining some or all of the pool water will lower the calcium hardness level. If the cause is the fill water, commercial hardness reducers or chelating agents will bond with the calcium to keep it trapped in solution.
The main difference between water and ecowater is the hardness rating difference. For water testing and filter options, see your local water specialist.
take 276 gm of salicylic acid in 1000 ml water to prepare 2M solution of the salicylic acid.
by testing the electrical
Dissolve 566.25g of KCl in 3L.