This worked on a Mazda6 and a RX-8.
1. Open Drivers door and leave open.
2. Lock and unlock the drivers door using the power lock switch on door panel.
(not sure if this is required)
3. Insert key into the ignition.
4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition. ( i have seen others say 24 seconds for 4 & 5 combined)
5. Open and close drivers door 3 times ending with door in the open position.
(you can depress the door switch instead)
6. Door locks should respond by locking and unlocking.
7. Press any button on remote 2 times. Doors should lock and unlock.
8. If programming a second remote press any button 2 times on it and door locks should cycle again.
9. Remove key from ignition and door locks will cycle again.
10. Test remotes.
I just tried this and it also works on Mazda MPV....Thanks!
how do you program keyless entry remote 98 GMC
How do you program a keyless entry remote for a 2005 KIA Amanti? Kent
How to program a keyless entry remote for 2008 Pontiac g5
You need one of these: http://en.wikipedia.org/wiki/Amstrad_CPC_664
How to program a keyless entry remote for 2008 pontiac g5
how to programm keyless entry remote for 2005 kia spectra5
The 1989 Buick Park Avenue does not come with a remote keyless entry. The keyless remote entry was not available till 1997.
I have a use remote that I need to program
It will depend on the make and model of the car. They do this so one can make a copy of the automated keyless entry remote.
How program my keyless entry remotes for 2003 chevy malibu
how do i program it
how can i program a remote for a 04 kia spectra