how to program my tv with the RCA D 770 - universal remote control which has no code search button
what are some of the codes for decibel universal remote
To program your remote you have to search for the local channels in your area.
Found this link for the AT&T 200C Remote control: http://www.anvari.org/cols/Useful_Users_Manuals/200C_Remote_Control.html
To program the remote with the codes, firstly, turn on the electronic gadget for which you are going to use this remote, by pressing the On and Off button. Then locate the Setup or the Code Search key on the remote control. These buttons may vary from remote to remote. Just hold on the setup or the code search key for 5 - 10 seconds or till the light on the remote
You need to have a Code search button or at least have a list of codes. You can call the manufacturer for a list or a book. Look for a phone number and you will be able to get some help with this problem.
To program the RCA RCR314WR Remote Control, use either the Direct code entry, Auto code search, the Brand code search, or the Manual code search.
Use the set button just below the volume down key
Solution Jumbo Remote with out the code search button. Here are the instructions: Hold the device button you want to program for 3 seconds & release. Push & release the power button & the red light will remain lit. Push the CHANNEL UP button over & over slowly until the device turns off. When device turns off press OK button.
Philips universal remote controls can operate audio and video devices of any brands. You have to enter the code of the device in the universal remote control. The codes are usually found in the manual or you can search through the library of codes by using the Code Search button of the remote.
This unit is basically the same as the D770 universal remote. You can download instructions from RCA at RCA.COM. The Only difference is there is no light below the ON/OFF button, the individual buttons will light, and when you hold down the device key and the on/off together all lights will come on.