Try this
Step 1: hold the hand help remote 3 inches away from the button you choose to program in your vehicle and hold down bothe buttons (hand held remote button and vehicle button) you should see slow blinking lights on your vehicle buttons. Once they change to rappidly, let the buttons go.
Step 2: on the garage door opener itself, you have a learn button( usually located next to your lights on the garage door opener) push and let go the learn code, a light will appear on above that button, then you will have 30-45 seconds until that light goes off.
Step 3: go back to the vehicle, push and hold the button you chose to program from step 1, until you see the garage door opener lights blink
If that happens then the button is trained. Hope that helps you.
Please leave a cooment on my website, and let me know how it worked.
http://www.valleydoors.webs.com
how do you program your keyless remote for 2003 Chevy blazer
how do I program a garage door opener for a 2002 chevy venture
To program the keyless entry remote on a Chevy Malibu, close all doors and put the key in the ignition. Hold down the power unlock button on the door while turning your key to on and off twice. Then release the power unlock button on the door.
How do i you program keyless remote for a 2004 malibu?
How do you program the remote key fob on a 2005 Chevy Malibu maxx
I have a use remote that I need to program
You need a gm scanner to program a factory gm remote fobs.
It's called a homelink transmitter. To clear all previous programming, before you start, hold down the two outside buttons for 10-30 seconds until the red light blinks rapidly. Sometimes it clears quickly and sometimes it takes a while, but it will blink very rapidly when it's cleared. Then to program, you have to have a remote control for the garage door you wish to program. Hold the remote control near the buttons. Press and hold the button on the remote control. Without releasing that button, press and hold the button you want to program. The red light will blink slowly and then when it "memorizes" the code, the red light will start blinking at a different speed. Now the car has programmed the remote to it. You are done, unless... If you have a newer garage door opener, there is more than likely a "learn" button on the back of the motor itself. If this is the case, you have to press the "learn" button on the back of the motor and then immediately press the button in your car. This has something to do with rolling code technology. If this isn't completely right (I'm telling you this from memory), go to homelink.com for more information. Don't forget to delete your programming before you sell your car.
How program my keyless entry remotes for 2003 chevy malibu
You will need to contact a dealership to program the remote key FOB on a 2001 Chevy Malibu. Stock remotes can only be programmed at Chevy dealerships.
This vehicle requires a scan tool to program the remote, a dealer or locksmith will have to do it.
replaced battery and now remote doesnt work . how do you reprogram remote