VW/Audi/SEAT/SKODA
Remote Control Programming (1997 ON)
Procedure
1. Switch Ignition ON and leave the key in the ignition. 2. Mechanically lock the vehicle using the Drivers door using a second
key. 3. Using the remote control press the Unlock button once, and the horn
will sound once. 4. Wait 6 seconds and press the unlock button once to activate the coding
procedure. The remote control will now be programmed. NOTE : When performing programming on additional remotes the procedure
is the same, except you press the unlock button 2, 3 or 4 times for the
different remote. For example : If programming 2 remotes press the unlock button twice with
a 1 second interval between each press, repeat for 3 and 4 remotes. 5. Switch Ignition OFF. 6. Remove key from ignition and check for operation. 7. The coding procedure can be repeated up to 4 times for additional remotes. 8. The ignition must be switched OFF between programming each remote
control. Remote Control Erasing (1997 ON) Procedure
1. Switch Ignition ON and leave the key in the ignition. 2. Mechanically lock the vehicle using the Drivers door using a second
key. 3. Press the remote control unlock button 5 times in 1 second intervals.
A short horn will sound. 4. Wait 6 seconds and press the unlock button once to activate memory
erase. 5. Switch ignition OFF, all remotes are now erased. Models Covered:
Ã'· Lupo
Ã'· Polo
Ã'· Golf
Ã'· Bora
Ã'· Passat
Ã'· Sharan (Only Mk2 models as far as I know though)
how do i reset key fob for a vw golf 2001 how do i reset key fob for a vw golf 2001
How do you program a key fob to a 2003 Chevy Malibu
To program any kind of key fob you have to take it to a dealership.
Need the year and model VW to answer the question.
How do I re program my key fob for renault laguna estate 1997?
To add a new key fob, take the vehicle and the key fob to an authorized dealer. To re-program a key fob after replacing it's battery, open the key fob, then read and follow the instructions inside.
http://www.ehow.com/how_7456283_program-key-fob-harley-davidson.html
The key fob programing requires the dealer's scan tool.
You normally do not have to reprogram the key when you replace the battery. If you do you will have to contact your VW dealer.
It is possible to program one key fob to use on two different cars. If the key fob uses a primitive fixed code system, programming two cars will not work.
How do you program the remote key fob on a 2005 Chevy Malibu maxx
go to radio shack