Antifreeze has to be put in at the overflow bottle.
The 1997 Ford Expedition came from the factory with a 50 / 50 mix of distilled water and ( GREEN color antifreeze , meeting Ford specification ESE-M97B44-A ) in the engine cooling systems
According to the 1997 Ford Expedition Owner Guide : It came from the factory with a 50 / 50 mix of distilled water and GREEN color antifreeze ( meeting Ford specification ESE-M97B44-A )
where do i find fuse diagram for a 97 ford expedition
There is no 95 Expedition. The first year was '97.
No such thing. Expedition came out in 97.
How to apply the amplifier to my expedition
would a cracked blocked cause a car to bubble antifreeze inside the reservoir of a 97 ford taurus ?
Where and how do you find the spark plugs for a 1997 ford expedition?
Either at the top of the radiator or fill through the coolant recovery tank
Bank 1 is the passenger side of the engine in your Ford Expedition Sensor 2 is after the catalytic converter ( downstream )
No such thing as a 95 Expedition. Didn't come out until 97.
If you mean "cabin air filter," there is not one on the 1997 Ford Expedition. I have a '97 Expedition Eddie Baur and have looked and researched thoroughly.
Ford and Chevy parts will not interchange, SORRY
Can you put a 350 gm motor in 97 ford f150
According to the 1997 Ford Taurus Owner Guide : It came from the factory with a 50 / 50 mix of distilled water and GREEN color antifreeze ( meeting Ford specification ESE-M97B44-A )
my remote only unlocks and does not lock what should i do?
97 expedition having same prob heard catalytic converter ? hope not 97 expedition having same prob heard catalytic converter ? hope not
How do i replace blend door motor
The Throttle position sensor is monted on the side of the throttle body .
How do I remove rear coil springs
The washer fluid for the liftgate is supplied by the windshield washer fluid reservoir in the engine compartment on a 1997 Ford Expedition according to the owners manual
My 97 Expedition with the 5.4 towing capacity is 8,000 lbs. Yours should be the same.
My ford expedition have problem with the Air conditioner sensor, so I bay the part but I don't no were the go, can so body help my and let my no were the par go. Thank you.
firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of V8 engine in a 1997 Ford Expedition
On a1997 Ford Expedition the engine coolant reservoir is in the engine compartment , on the drivers side , between the front of the vehicle and the round engine air filter housing
Passenger side near the firewall under the exhaust manifold
on drivers side at back of engine.
PUT IT IN THE RADIATOR. MAKE SURE YOUR ENGINE IS COOL AND USE THE DRAIN COCKPIT LOCATED ON THE BOTTOM OF YOUR RADIATOR TO DRAIN ENOUGH OF THE FLUID TO ACCOUNT FOR HOW MUCH ANTIFREEZE YOU ARE ADDING.
V8 engine in Ford Expedition firewall 4 - 8 3 - 7 2 - 6 1 - 5 front
5W-30 is the preferred oil , according to the Owner Guide
The diagram to a fuel pump helps ensure the person puts the part in correctly. The fuel pump diagram for the 1997 Ford Expedition is found in its maintenance manual.
no , the Ford Explorer didn't have available third row seating until the 2002 model year redesign
were is coil 6 on a ford expedition ----------------------------------------------------------------------------------- On a Ford Expedition , 5.4 liter V8 engine : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle * the first answer is not mine , the 2nd answer is , Helpfull *
In the right front passenger footwell , behind the kick panel for the 1997 Ford Expedition
Bank 1 is the passenger side of the engine on a Ford Expedition Sensor 2 is in the exhaust after it has passed through the catalytic converter ( downstream )
On a 1997 Ford Expedition : Bank 1 is the passenger side of the engine Sensor 1 would be close to the engine before the exhaust enters the catalytic converter
They probably aren't grounded.
Do you mean the electrical ignition switch or the cylinder lock and key..?
1 - 3 - 7 - 2 - 6 - 5 - 4 - 8
The easiest way to disarm the 1997 Ford Expedition factory alarm is to remove the fuse. The location of the fuse can be found on the inside cover of the fuse box.
If it's on a 97-01 Ford Expedition you need to unplug the factory harness from the shift motor and then unbolt the shift motor from the transmission. I've also included a great how to video link that will show you how to accomplish all of this.
On a 1997 Ford Expedition : The Mass Air Flow sensor is between the engine air filter and the big engine air intake tube ( it is INSIDE the round plastic housing but you will see where the wires go in )
On your 1997 Ford Expedition : I BELIEVE that if you open the drivers door you will see the Safety Compliance Information Label ( information sticker ) either on the end of the door or on the latch pillar ( it will show what size of tires were on the vehicle from the factory )
It is important to use Mercon, not Mercon V transmission oil in a '97 Expedition. It will take about 14 quarts to refill it after a complete drain.
My 97 5.4 averages 12-14 and I've gotten a best of 17 on a 600 mile trip. But you don't really buy an Expedition for fuel mileage.
That vehicle uses platinum tipped spark plugs. We recommend every 60,000 miles.
cylinder #8 is on the drivers side at the rear the last plug nearthe firewall
Try your local junk yards, or your local dealer.
firewall 4 - 8 3 - 7 2 - 6 1 - 5 front
On the 5.4 the knock sensor is under the intake and the connector is in the back of the motor on the passenger side.