answersLogoWhite

0


Best Answer
Copy

put them back on using a screwdriver to bend them a little to snap back over the area where they were originally, make sure that the flat end with no points is the area against the brake disk and it should come around and have the *points* or hook ends wrap around and point toward the middle of your pads. if this doesent help, call a Parts store and ask, or even the dealer. good luck

2009-08-13 03:04:55
This answer is:
πŸ€“
🀯
πŸ€”
User Avatar

Your Answer

Loading...

Related Questions

Why does the front brakes drag on a 002 dodge Dakota?

Sticking brake calipers. This can be caused by moisture in the brake fluid which will cause the calipers to rust. Replace the calibers and replace all the brake fluid. It can also be caused by driving with your foot on the brake.


Do you compress front brake calipers the same way as rear calipers on a 2006 ford freestyle?

No need to rotate the front caliper pistons as you compress the front calipers. That process is only for the rear calipers because of the parking brake mechanism.


How do you repair front brake cylinder front Toyota tacoma 1995?

the tacoma has calipers on front.


Are back brake calipers the same on non turbo as turbo?

The brake calipers can be the same the front calipers on turbo cars is normally bigger as up to 90% of your braking force is on the front brakes but the back ones are somtimes bigger not always


Why wont the front disc brakes release completely on a 1992 dodge Dakota?

Unless the calipers are frozen- you will have a slight drag as the brake pads maintain contact with the caliper


Why so much brake dust from front calipers 2000 ranger?

Could be cheap brake pads.


Will mark 3 mondeo front brake calipers fit a ford focus?

No


How do you change the brake pads on a 1987 Volvo 240DL?

Put the car on jack stands and remove the wheels. Locate the calipers and brake pads and remove the pins and clips from the calipers. Slide out the old brake pads and push the piston back to make room for the new pads and shims. Slide in the new pads and shims and put the pins, clips and cotter pins back in. The front and rear replacement process are very similar, but have different pads and shims.


What are the steps to replace front brakes on a 1989 Volvo 240 DL?

Put the car on jack stands and remove the wheels. Locate the calipers and brake pads and remove the pins and clips from the calipers. Slide out the old brake pads and push the piston back to make room for the new pads and shims. Slide in the new pads and shims and put the pins, clips and cotter pins back in. The front and rear replacement process are very similar, but have different pads and shims.


How do you replace front brake pads on 93 Dodge Dakota 2 wheel drive?

Remove the wheels then the calipers. Replace the pads and press the pistons back into the calipers with a "C" clamp. Be sure to install any anti-squeek grease or shims included with the pads.


Will 16 inch wheels fit on your 2006 Chevy 1500?

No front brake calipers are to big. If you must calipers can be machined down at a big cost.


Why do the front brake calipers freeze after putting new brakes on a 1997 Ford E150 Van?

Corrosion? Contaminated brake fluid?


What model 2003 dodge caravan uses TRW brake calipers?

The 2003 model has different caliper assembly for the brake system of the vehicle. If your Caravan has drum rear brakes, it uses TRW brake calipers. If you have disc rotors in the rear then the front will have "Continental Teves" calipers (Haynes 9-3).


How do you compress the front brake calipers on a 2002 Mercury Cougar?

The easiest way is with a "C" clamp.


What size Allen wrench to remove the front brake calipers on a 2000 ford focus?

7mm


What size Allen wrench do you need Lincoln Navigator front brake calipers?

It is a 9mm allen.


How much would it cost to replace brake calipers on a 2004 Pontiac Grand Am GT?

it cost me 650$ for new front calipers and discs, they seased up


Is changing the rear disc brakes the same as the front disc brakes on a 2002 Jetta TDI 19 liter?

no. on the front brake calipers the pistons have to be pushed back into the calipers to make room for the new brake pads. on the rear brake calipers the pistons have to be SCREWED back into the calipers. there are notches on the inner edge of the piston rim. you can engage the notches with large needle nose pliers or a large flat washer. turn the piston clockwise as you face it to get it to go in.


Where can you get the rebuilding kits for the front calipers of a 1968 dodge dart with the small bolt pattern that has the original 4 piston brake calipers?

try manciniracing.com and see if they carry them.


How do you replace front brake pads on a Saturn L300?

Lift the car on a car jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Next, dispose of the old brake pads, put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the car to the ground.


2001 Olds Alero-no brake pressure after replacing front brake pads rotors and calipers why?

It sounds like you have air in your brake lines. It sounds like you have air in your brake lines.


What is the torque specs for the brake calipers on a 2000 expedition?

Front disc brake caliper bleeder screw: between 13-18 ft. lbs


How do you replace the front brake rotors on a 2000 Maxima?

Remove the front wheel. Loosen and remove the two 15 or 17 mm bolts securing the calipers in place (access from the back side of the calipers). Lift the calipers out of the way and your rotor will be somewhat loose. Pull off the rotor.


Why do my front brakes keep locking up on a 1984 Dodge pickup?

it is possible that your brake hoses are bad and soft not letting the brake fluid back out of your calipers


Do i need calipers to change 2003 Dodge Grand Caravan sport front brake pads?

Unless the caliper is broken, you can just replace the brake pads.