Usually with a 'rubberizing' additive that contains LLDPE (Linear low density polyethylene) More branches and better bonding, less amorphous. Greater tensile and impact strength than LDPE or HDPE.
LDPE (low density polyethylene) is used for making plastic bags because it is appropriate and HDPE (High density.....) is not.
Technically, adequately made LDPE and HDPE bags/containers are safe for food storage and consumption. Recycled materials and unsafe additives/colors, etc. must not be added.For instance, LDPE bags are more transparent in nature than HDPE, so it ideal for clear zip-lock sandwich bags. HDPE is tougher and opaquer (UV protection of sensitive foods), so used for milk bottles. Consider factors like barrier, toughness, seal ability before making your purchase.
LDPE has excellent resistance to water, moisture and most organic solvents and chemicals (except ones with aromatic or chlorine content). LDPE is the low density version of PE. This has less hardness, stiffness and strength compared to HDPE, but better ductility. It is opaque and only thin foils can be transparent. LDPE is used for packaging like foils, trays and plastic bags both for food and non-food purposes. Used as protective coating on paper, textiles and other plastics, for instance in milk cartons.
LDPE is thermoplastic.
Some plastic used are PET (polyethelene teraphthalate), HDPE (high-definition polyethelene), LDPE (low-definition polythelene), PP (propolene), and sometimes the controversial BPA (bisphenal- A).
PMMA LDPE HDPE
LDPE is softest, HDPE is harder, PMMA is much harder than HDPE
enthalpy LDPE
LDPE is Low Density PolyEthylene.HDPE is High Density PolyEthylene.
LDPE , HDPE, LLDPE
You don't specify anything to compare it to. If you mean the difference between LDPE and HDPE, then LDPE has branched chains which pack together loosely, making a softer material. HDPE is firmer because it has unbranched chains which pack together tightly.
LDPE , HDPE, LLDPE
Because LDPE is an abbreviation of Low Density Poly Ethylene, whereas HDPE stands for High Density Poly Ethylene. This means LDPE is less efficiently packed together than HDPE, due to the larger amount of branching found in LDPE, leading to a weaker material.
HDPE has higher density therefore it has greater tensile strength
In increasing order, LDPE has the lowest melting point at 221 to 239 degrees Fahrenheit. It is followed by HDPE at 266 degrees Fahrenheit and PPMA at 320 degrees Fahrenheit.
They can be made from several different things: Butene Copolymer Copolymer - HDPE (High Density Polyethylene) Ethylene Vinyl Acetate HDPE - Reclaim LLDPE (Linear Low Density Polyethylene) -Hexene Copolymer Homopolymer - HDPE Homopolymer - LDPE (Low Density Polyethylene) Homopolymer - PP (Polypropylene) PP-IM (Impact) LDPE-Reclaim LLDPE-OC (Octene Copolymer) LDPE Copolymer For more information go to http://www.townsendpolymer.com
LDPE is softer, more flexible and melts at lower temperatures than HDPE. LDPE is used for things like sandwich bags. HDPE is harder, has a higher chemical resistance and can withstand higher temperatures. (120 Degrees Celsius for short periods and 110 Degrees Celsius continuously) It is used for things like Plastic bins.