The way that a person would release the spare wheel on a Peugeot 307 when the release handle comes off is not available. It is best to contact a dealer or a mechanic for further information.
Removing a spare tire on a 1998 Blazer is very east. The tire is located under the rear of the blazer. The tire has a turn handle that will release the tire. Turn the handle until the tire releases.
Insert the jack crank handle into the hole in the back near the license plate and crank the spare down until you can release it from the cable.
There should be a hole behind the top of the bumper in the body, right above the license plate. Take the jack crank handle and insert it into the hole, and match the end of the handle to the fitting. Then unscrew the fitting. The spare tire will slowly lower itself.
To remove the spare tire on a Mercury Mariner insert the jack handle into the hole provided on the rear bumper of the vehicle. Turn the jack handle clockwise to lower the spare from underneath the vehicle.
How to release spare on 2003 rodeo
how do you release the spare tire on a 2000 mercury mountaneer?
The spare tire lowering handle is probably located under the rear seat on the 1999 GMC Sierra, if the vehicle is an extended cab. If it is not the extended cab, look behind the driver's seat for the handle.
how do you release a spare tire on a 1999 ford expediton xlt
The spare tire is under the bed of the truck, as you already know. You will need the handle for the factory jack. There should be a hole in the rear bumper. Slide the jack and the extention handle through the hole. You should be able to spin the handle and lower the spare tire to the ground. Make sure the give yourself enough slack to get the holder out from inside the spare tire rim.
open your rear door,you will see a round opening just after the rear bumper,stick your jack handle all the way in and turn handle counterclockwise til you see your spare on the ground,to hook it back up turn handle clockwise.
Notice the small hole below the tail gate but above the license plate. Insert the jack handle into that hole and turn the handle counterclockwise. The spare tire will lower down to the ground.
Get the long section of the screw jack handle that came with the truck and insert the end that fits into the screw jack throught the slotted hole above the rear liscense plate location. Engage the end of the jack handle into the spare tire crank mechanism. Place the screw jack turning handle onto the long jack handle and turn counter clockwise to lower the spare tire.