Just trying to help my sister Terri with her Corolla.Moe
Begin by removing the retaining ring at the top of your 1996 Mercury Tracer ignition switch. The ignition lock cylinder will slide out. Remove the wiring harness from the end of the cylinder. Reverse the process to install your new ignition lock cylinder.
Insert the key into the ignition. Push the release/switch button at the bottom of the cylinder, and pull the cylinder out.?æ
Begin by removing the retaining ring at the top of your 1996 Chevrolet Silverado ignition lock cylinder. Slide the ignition lock out and remove the wiring harness. Reverse the process to install your new ignition lock cylinder.
i have a 1996 varago..to remove the ignition switch you must remove the head light Lind's and all that is inside will be able to see the screws that holds the switch in
how to remove key cylinder on 98 sunfire
This is a sping lock DIY video and explains very well in this video how to remove your ignition, hope it helps http://www.youtube.com/watch?v=tETEtb5Yr_o
==This operation requires special tools.== Remove the steering wheel, and tilt assembly, you can then see a black screw above the rounded area for the lock cylinder, remove this screw and the cylinder will then pull out.
1996 rodeo- how to remove key from lock ignition?
Replace the ignition lock cylinder.
how to pull a ignition cylinder on a S-10 extented cab automatic
Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disable the airbag system * Remove the tilt lever if equipped * Remove the upper and lower steering column covers Ignition Switch * Remove the ignition switch retaining screws * Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors Key Lock Cylinder * Turn the key to the run postion * Depress the lock button and remove the key lock cylinder
Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disable the airbag system * Remove the tilt lever if equipped * Remove the upper and lower steering column covers Ignition Switch * Remove the ignition switch retaining screws * Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors Key Lock Cylinder * Turn the key to the run postion * Depress the lock button and remove the key lock cylinder