there is a pin in the backside of the lock cylinder push it in and pry slightly on the bottom of the cylinder and pull it out , it will come out a little stiff because there is a piece of rubber on the side.
See You-Tube Video : http://youtu.be/lBNUuO4ldfI How to Remove a broken key from an Ignition. Using the Broken Key Extractor Kit from: www.WedgeCo.com
Take it out haha
If the engine is twincam, probaply head cover gasket is broken. Then oil from the head reach one or more spark plugs and when the engine is hot this oil causes smoke. You can find out if so, when remove the spark plugs one or more of them will have oil on the trade.
Flush the lock with a lubricant. Use the handle of the broken key as a guide. Find a thin wire and stiff it along the sides of the broken key part. Hold the wire in place and remove the part.
How do you remove steering wheel daewoo lanos
how do i remove the axel shaft off the daewoo cielo
Accidents like breaking a car key in the ignition do happen. A person can use tweezers to remove the key piece or call a professional.
How do you remove the gear shift knob on a 2000 Daewoo Lanos?
no need to remove the broken key, you will find that you short bit when inserted into barrel will turn the barrel, at least until you get a newy
Remove the ignition retaining ring. Pull the ignition barrel out. Remove the wiring harness from the back of the ignition.
remove the ignition tumbler from column and crank it with a insulated handle flatblade screwdriver if the ignition is located in the dash remove key tumbler by inserting a small pin in the hole located above the key hole and it will pop out using a screwdriver and turn it over that way
remove and replace