I called any dealership parts department and not only will they provide a picture they also provide instructions...
In the engine bay
my Mazda 1996 b4000 power window relay is located in an auxiliary relay box under the instrument panel next to the steering wheel shaft. The size of the box is about 3x5x2 and it has 8 relays in it.
Bring to a shop that has an ABS scanner to determine the problem
The starter interrupt relay for my 1996 Mazda b4000 truck is located in the auxiliary relay box behind instrument panel next to the stairing wheel shaft.
underneath the center console between the front seats
(1)If the truck is equipped with manual windows, remove the window regulator handle. (2) If the truck is equipped with power windows or door locks, remove the switches by removing the screws for the power window switch and the other switch connectors on the back side of the door trim finish panel. (3)Remove the screws from the armrest area of the door panel. (4)Remove the inner door handle. (5)Remove the screw (if equipped) at the lower rear of the door panel. (6) Lift the panel at least 1-1/2 inches to disengage it from the slots along the bottom of the door, then remove it. (7) If necessary, carefully peel the watershield from the door. Be careful not to tear it. (8) Installation is the reverse of the removal steps. - Mazda Pickups Repair manual
how to remove the vent from dashboard of 1996 ford contour
Standard heavy duty 30 weight is always good. I've seen specification for 10w-40 in manuals, though. I use 30 for everything, though. I've got 250,000 on my 94 b4000 now.
The 1996 Ford Escort inside door panel is held in place by eight retaining clips. Pry outward on each retaining clip to remove the door panel.
you take it off, by taking it off how do you remove window hardware from panel?
The engine is overheating.
Removing a door panel on a 1996 Cadillac Eldorado is very simple. The door is held in place by clips and a few screws. Remove the clips and the screws and the door panel comes right off.