how do you take the dash board outon a 2006 chev Malibu
how do I remove the dash panel on a Vauxhall omega
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
Remove wood panel from left and right of console. Remove adjacent screws. open glovebox and squeeze sides to open all of the way. remove bottom screw from glove box. gently pry panel off
the power train control module is under dash by steering wheel on drivers side,remove insulation panel from beneath the instrument panel on drivers side!!
2000 Malibu has one on left dash fuse box and one on right end of dash panel.
Remove Lower Dash Panel passenger side. Remove glove box. Remove middle dash panel (below glove box). ECU is attached to the back of middle dash panel.
Here's a great how to video that will show you how to properly remove the door panel on your 2005 Chevy Malibu. A link has been included below.
Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.
remove the top dash panel closest to the windshield, then remove mounting screws for dash module.
Remove the small screws that hold it.
Pull the hazard light button pocket, and remove the philips screw behind it. Remove the two philips screws on the under side of the dash, immediately above the dash instrument panel, and pull the trim panel out. Remove the four philips screws securing the dash instrument panel, and pull the panel out.
Remove center stack bezel (radio, heater control), remove screws from instrument trim panel at ctr stack and remove instrument trim panel, remove dash top panel, replace speakers.